Motorola SG 2000 operation manual SG2-LR

i v C o n t e n t s

Figure 3-6	JP1 common-powered single or redundant power configuration	3-7
Figure 3-7	JP1 split-powered redundant power supply configuration	3-7
Figure 3-8	SG2-75 low-gain output-stage pad-effects chart	3-14
Figure 3-9	SG2-87 low-gain output-stage pad-effects chart	3-15
Figure 3-10	SG2-* link c/n performance, 77 channels	3-16
Figure 3-11	SG2-* link c/n performance, 110 channels	3-17
Figure 3-12	DS-SG2-DRRB board	3-18
Figure 3-13	DS-SG2-DRRB board installed	3-19
Figure 3-14	Location of JXPs on E-pack	3-20
Figure 3-15	SG2 lid configured with the DS-SG2-DRRB board	3-21
Figure 4-1	Service cable connection and compression fitting	4-1
Figure 4-2	Mounting bracket-front view	4-3
Figure 4-3	Mounting bracket-rear and side views	4-4
Figure 4-4	Center conductor length	4-5
Figure 4-5	Housing lid and fiber spool tray	4-6
Figure 4-6	Fiber spool tray	4-6
Figure 5-1	Single receiver	5-1
Figure 5-2	Redundant receiver	5-2
Figure 5-3	Broadband/narrowcast	5-2
Figure 5-4	B override	5-3
Figure 5-5	A override	5-4
Figure 5-6	Status monitor/MCB operation	5-4
Figure 5-7	Redundant return	5-5
Figure 5-8	Split return	5-5
Figure 5-9	RF chassis and location of the SG2-RPM/C or SG2-RPM/S board	5-6
Figure 5-10	DS-SG2-DRT/A redundant return	5-7
Figure 5-11	DS-SG2-DRT-2X/A split return	5-8
Figure 5-12	DS-SG2-DRT-2X/A redundant return	5-8
Figure 5-13	SG2-LR	5-10
Figure 5-14	Test-point voltage versus optical power	5-12
Figure 5-15	Wavelength selection jumper	5-13
Figure 5-16	SG2-IFPT	5-14
Figure 5-17	SG2-FPT	5-15
Figure 5-18	SG2-DFBT	5-16
Figure 5-19	SG2-DFBT/3	5-18
Figure 5-20	SG2-EIFPT	5-19
Figure 5-21	DS-SG2-DRT/A	5-20
Figure 5-22	DS-SG2-DRT/A	5-20

SG 2000 Installation and O peration Manual