Your Battery
Installing the Batteries
New batteries are supplied uncharged and fitted within a protective battery carrier. To remove the batteries, press the release catch on the battery carrier and open the cover.
To install the batteries in your phone:
1Press the release catch of the phone battery cover and slide the battery cover towards the bottom of the phone.
2Align the positive and negative (+ and
3Press the battery towards the connections and push it downwards until it clicks into place.
4Replace the phone battery cover.
Important Battery Information
!Always treat your batteries with care. See ‘Batteries’, at the beginning of this manual.
!Never leave your battery in extremely high temperatures (over 60˚C), for example behind glass in very hot, direct sunlight.
!Only Motorola Original Accessory batteries can be charged in the phone. This is to protect you and your phone from the risks of incorrect charging.
Charging a New Battery
New batteries are supplied in a totally uncharged state.
To ensure maximum battery performance, a new battery (or battery that has not been used for several months) should be charged for at least 14 hours before use.
AA new battery will require several full charge/discharge cycles in order to achieve its optimum performance.
AA new battery, or a battery that has not been used for several months, may cause a premature fully charged indication. Ignore this indication and let the battery charge for several more hours, remove and
!Your batteries will not charge if they are not matched properly to the phone connection markings (+ and
About Your Phone and Battery 13 | English |
|
|