Multi-Tech Systems CF220 manual CallFinder Server Operation, Front Panel LEDs

Chapter 4: CallFinder Server Operation

Chapter 5 – CallFinder Server

Operation

Front Panel LEDs

Label		Name	Description
Identifier
	General LEDs
		Power	On if unit is on.
		Status	Flashing Green = unit is functioning properly
			Solid Red = unit is having its software updated. DO NOT
			TURN OFF if Status LED is solid red.
			Off = system is booting or power is off
	Line 1 LED		Presents status of Channel 1.
TD		Transmit Data	Channel 1 is being configured.
RD		Receive Data	Channel 1 is reporting.
TR		Terminal Ready	When lit, channel 2 is ready to receive a call.
			Lit when DTR to DID modem is high.
DID		DID	The telco central office is drawing power from the DID line
			which means that a call is in progress.
	Line 2 LEDs		Presents status of channel 2.
TD		Transmit Data	Channel 2 is being configured.
RD		Receive Data	Channel 2 is reporting.
TR		Terminal Ready	When lit, channel 2 is ready to receive a call.
			Lit when DTR to DID modem is high.
DID		DID	The telco central office is drawing power from the DID line
			which means that a call is in progress.
	Ethernet LEDs
ACT		Activity	Lit when packets are being transmitted by any device on the
			Ethernet network (not necessarily by the CallFinder).
LINK		Data Link	Lit when a physical link has been established with the
			Ethernet network.
SPEED		Data Rate	Indicates speed of Ethernet connection. If lit, data rate is 100
			Mb/sec; if not lit, data rate is 10 Mb/sec.

Updating CallFinder Firmware

Successive editions of CallFinder firmware will be issued over time. There are two kinds of CallFinder firmware: (1) server firmware, and (2) firmware used by the DID-channel modems. When issued, such updated firmware files will be accessible on the MultiTech web site. However, updating is done by the FaxFinder/CallFinder Manager software. To install updated firmware, see “Updating Firmware” in Chapter 7: FFCF Manager Operation.

Multi-Tech Systems, Inc. CF220 CallFinder User Guide 47