Nortel Networks MSC8101 ADS user manual 118

Freescale Semiconductor, Inc.

Freescale Semiconductor, Inc.

--with default MODCK setting from DIP-Switch

--PONRESET pulse resets while WD.

--Implemented as ripple counter with 30 stages

--WDEn.s = GND; WDEn.r = GND;

--WDEn.prn = !(MPC_WRITE_BCSR_4 & (D[0..1] == B”10”));

--Preset to FF when write b’10 bit to BCSR4

--WDEn.clrn = !END_OF_WD_TIMER & !MPC_READ_BCSR_4 & PRST~; CLEAR_TO_WD_CTRL = LCELL (PRST~);

StartStopWD.clrn = CLEAR_TO_WD_CTRL;

StartStopWD.clk = !(MPC_WRITE_BCSR_4 & (D[0..1] == B”01”)); StartStopWD.s = VCC; StartStopWD.r = VCC; ---- Provide toggling

END_OF_WD_TIMER = WD_TIMER1.dv2 & WD_TIMER1.dv4 & WD_TIMER1.dv8 & WD_TIMER1.dv16 & WD_TIMER2.dv2 & WD_TIMER2.dv4 & WD_TIMER2.dv8 & WD_TIMER2.dv16 & WD_TIMER3.dv2 & WD_TIMER3.dv4 & WD_TIMER3.dv8 & WD_TIMER3.dv16 & WD_TIMER4.dv2 & WD_TIMER4.dv4 & WD_TIMER4.dv8 & WD_TIMER4.dv16 & WD_TIMER5.dv2 & WD_TIMER5.dv4 & WD_TIMER5.dv8 & WD_TIMER5.dv16 & WD_TIMER6.dv2 & WD_TIMER6.dv4 & WD_TIMER6.dv8 & WD_TIMER6.dv16 & WD_TIMER7.dv2 & WD_TIMER7.dv4 & WD_TIMER7.dv8 & WD_TIMER7.dv16 & WD_TIMER8.dv2 & WD_TIMER8.dv4;

WD_TIMER1.g = StartStopWD.q; WD_TIMER2.g = StartStopWD.q; WD_TIMER3.g = StartStopWD.q; WD_TIMER4.g = StartStopWD.q;

WD_TIMER5.g = StartStopWD.q; WD_TIMER6.g = StartStopWD.q; WD_TIMER7.g = StartStopWD.q; WD_TIMER8.g = StartStopWD.q;

WD_TIMER2.clk = WD_TIMER1.dv16; -- Cascade

WD_TIMER3.clk = WD_TIMER2.dv16; -- Cascade

WD_TIMER4.clk = WD_TIMER3.dv16; -- Cascade

WD_TIMER5.clk = WD_TIMER4.dv16; -- Cascade

WD_TIMER6.clk = WD_TIMER5.dv16; -- Cascade

WD_TIMER7.clk = WD_TIMER6.dv16; -- Cascade

WD_TIMER8.clk = WD_TIMER7.dv16; -- Cascade

HRESET_FEdge.clock = Extclk;

HRESET_FEdge.aclr = HRESET~ OR !R_PORI~;

IF(HRESET_FEdge.q[] == 3) THEN HRESET_FEdge.cnt_en = GND; -- Disable count after term value

ELSE	HRESET_FEdge.cnt_en = VCC;
END IF;
RESETS = (HRESET_FEdge.q[]	== 1)	OR (HRESET_FEdge.q[] == 2) OR
!(R_PORI~ & PRST~);
WD_TIMER1.clr = RESETS; --	Reset first cascade divider
WD_TIMER2.clr = RESETS; --	Reset second cascade divider
WD_TIMER3.clr = RESETS; --	Reset third cascade divider
WD_TIMER4.clr = RESETS; --	Reset forth cascade divider
WD_TIMER5.clr = RESETS; --	Reset third cascade divider
WD_TIMER6.clr = RESETS; --	Reset forth cascade divider
WD_TIMER7.clr = RESETS; --	Reset forth cascade divider
WD_TIMER8.clr = RESETS; --	Reset forth cascade divider
SPARE1 = (HRESET_FEdge.q[]	== 1) OR (HRESET_FEdge.q[] == 2);

%

******************************************************************************

%

END;-- End of BCSR module

C-118 MSC8101ADS RevB User’s Manual MOTOROLA

For More Information On This Product,

Go to: www.freescale.com