Nortel Networks MSC8101 ADS user manual Contents

Freescale Semiconductor, Inc.

Freescale Semiconductor, Inc.

CONTENTS

1•1	Introduction	11
1•2	Abbreviations’ List	11
1•3	Related Documentation	11
1•4	Specification	12
1•5	ADS Features	13
2•1	INTRODUCTION	16
2•2	UNPACKING INSTRUCTIONS	16
2•3	HARDWARE PREPARATION	16
2•3•1	Setting The Core Supply Voltage Level	18
2•3•2	Setting MODCK(1:3) For Initial PLLs’ Multiplication Factor - SW9	18
2•3•3	Setting HReset Configuration Source	18
3•1	OnCE Connection Scheme	19
3•2	Host I/F Operation	19
3•3	Stand Alone Operation	20
3•4	+5V Power Supply Connection	21
3•5	JTAG/OnCE Connector - P6	21
3•6	HOST I/F Connector - P4	22
3•7	Terminal to MSC8101ADS RS-232 Connection	23
3•8	10/100-Base-T Ethernet Port Connection	24
3•9	Flash Memory SIMM Installation	24
4•1	INTRODUCTION	26
4•2	SWITCHES	26
4•2•1	Host I/F Setting - SW1	26
4•2•2	Emulator Enable (EE) - SW2	26
4•2•3	ABORT Switch - SW3	27
4•2•4	SOFT RESET (SRESET) Switch - SW4	27
4•2•5	DATA Bus Width Setting - SW5 & SW6.	27
4•2•6	HARD RESET (HRESET) - Switch - SW7	28
4•2•7	Power-On RESET Switch (PRESET) - SW8	28
4•2•8	Configuration Switch - SW9	28
4•2•9	Boot Mode Select - SW10	29
4•2•10	Software Options Switch - SW11	30
4•3	Jumpers	30
4•3•1	JP1 - DLL Disable.	30
4•3•2	JP2 - Clock Buffer Set.	30
4•3•3	JP3 - 50 Ohm Enable.	31
4•3•4	JP4 - VPP Source Selector	31
4•3•5	JP5,JP8 - 600 Ohm Termination.	31
4•3•6	JP6,JP7 - MIC Enable.	31
4•3•7	JP9 - 5V power supply for CODEC	31
4•3•8	JS1-5 - Current Consumption Measurement	32
4•3•9	JG1-6 GND Bridges	32
4•3•10	Solder Bridges	32
4•4	LEDs	32
4•4•1	Fast Ethernet Indicator - LD1	32
4•4•2	Fast Ethernet RX Indicator - LD2	32
4•4•3	Ethernet TX Indicator - LD3	32

MOTOROLA	MSC8101ADS RevB User’s Manual	III
	For More Information On This Product,
	Go to: www.freescale.com