![](/images/new-backgrounds/1298906/298906341x1.webp)
TROUBLESHOOTING
LCD MESSAGES
The liquid crystal display (LCD) on the control panel indicates the printer status and if there is a problem with the printer. Status and error messages are listed below together with an explanation of what each message means:
LCD Message
*****TONER LOW
*****TONER SENSOR ERROR
BELT UNIT MISSING
CANCELLING JOB
CENTRO I/F ERROR
CHANGE ***** IMAGE DRUM CHANGE BELT UNIT
CHANGE FUSER UNIT
CHANGE PAPER TO *****
CHECK BELT UNIT
CHECK DUPLEX
CHECK FUSER UNIT
CHECK IMAGE DRUM
COLLATE FAIL
COLOUR ADJUSTING
COLOUR BALANCE ADJUST
COMMUNICATION ERROR
DATA ARRIVE
DATA PRESENT
Meaning
Toner is low (***** indicates colour).
Error with the toner sensor (***** indicates colour). Call for service.
Transfer belt unit is missing.
Cancelling the current job.
Centronics interface error (parallel interface).
Change the image drum (***** indicates colour).
Change the transfer belt.
Change the fuser unit.
Paper must be changed to correct paper size and/or media type (***** indicates size or media type).
Check the transfer belt for paper jam, correct installation, etc.
Check the duplex unit for paper jam, correct installation, etc.
Check the fuser unit for paper jam, correct installation, etc.
Check the image drum for correct installation, etc. Colour will be indicated.
Collating of multiple copies has failed.
Adjusting head so that colours do not shift on to each other.
Adjust the colour balance.
There is an error with communications to computer.
Data has been received but processing has not started yet.
TROUBLESHOOTING > 171