FX Emulation
Item
CHARACTER PITCH
CHARACTER SET
SYMBOL SET
LETTER 0 STYLE
ZERO CHARACTER
LINE PITCH
WHITE PAGE SKIP
CR FUNCTION
LF FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
FIT TO LETTER
TEXT HEIGHT
Value | Description |
10 CPI; 12 CPI; 17 CPI; | Specifies character pitch in this |
20 CPI; PROPORTIONAL | emulation. |
Set 1; Set 2 | Specifies a character set. |
IBM 437 | Specifies a symbol set. |
Disable; Enable | Specifies the style that replaces 9BH |
| with letter o and 9DH with a zero |
Normal; Slashed | Sets the zero to be slashed or |
| unslashed. |
6 LPI; 8 LPI | Specifies the line spacing. |
OFF; ON | Specifies whether or not the printer |
| ejects a blank sheet. |
| Not available on duplex operation. |
CR; CR+LF | Sets functionality on receipt of CR |
| code. |
LF; LF+CR | Sets functionality on receipt of LF |
| code. |
80 COLUMN; 136 | Specifies the number of characters |
COLUMN | per line. |
11 inch; 11.7 inch; | Specifies the length of paper. |
12 inch |
|
0.0 inch - 1.0 inch | Specifies the distance of print from |
| the top edge of the paper. |
0.0 inch - 1.0 inch | Specifies the distance of print from |
| the left hand edge of the paper. |
Disable; Enable | Sets the printing mode that can fit |
| print data, equivalent to 11 inches (66 |
| lines), in the |
| area. |
Same; Diff | Sets the height of a character. |
| SAME: Regardless of CPI, same |
| height. |
| DIFF: As CPI, character heights vary. |
