5.For face down printing, make sure the rear paper exit is closed (the paper exits from the top of the printer). Paper is stacked in printed order and paper tray capacity is approximately 500 sheets, depending on paper weight.
6.For face up printing, make sure the rear paper exit is open and the paper support is extended. Paper is stacked in reverse order and tray capacity is approximately 100 sheets, depending on paper weight.
CAUTION!
Don’t open or close the rear paper exit while printing as it may result in a paper jam.
NOTE
Always use the rear stacker for thick paper (card stock etc.)
7.Load letter headed paper face down as shown for both portrait and landscape:
