Oki 7100 manual Colour menu

Colour menu

Item	Value	Description
AUTO DENSITY	Auto; Manual	Select whether density adjustment
MODE		and Toner Response Curve (TRC)
		compensation is automatic.
		Auto: Density adjustment is
		automatically run under specified
		conditions, and reflected in the TRC
		compensation.
		Manual: The printer does not
		voluntarily run density adjustment.
ADJUST DENSITY	Execute	If EXECUTE is selected, the printer will
		immediately adjust density and reflect
		it in the TRC compensation. Density
		adjustment must be executed when
		the printer is idling. It may become
		invalid if executed in any other state.
COLOUR TUNING	Print pattern	Prints the pattern for the user to adjust
		TRC. Ordinarily this function is not
		needed because TRC is automatically
		adjusted to the recommended levels
		through density adjustment and TRC
		compensation. This function permits
		TRC adjustment to your requirement by
		using the adjustment menu of
		HIGHLIGHT, MID-TONE, and DARK for
		each of CMYK. Adjustment results will
		be reflected as offset values (addition)
		to the corrections made through the
		Adjust Density/TRC Compensation
		function.
CYAN, MAGENTA,	0+1+2+3-3-2-1	Adjusts HIGHLIGHT (light area) of Cyan,
YELLOW OR BLACK		Magenta, Yellow or Black TRC.
HIGHLIGHT		Plus indicates adjustment toward a
		darker level and minus toward lighter.
CYAN, MAGENTA,	0+1+2+3-3-2-1	Adjusts MID-TONE of Cyan, Magenta,
YELLOW OR BLACK		Yellow or BlackTRC.
MID-TONE		Plus indicates adjustment toward a
		darker level and minus toward lighter.
CYAN, MAGENTA,	0+1+2+3-3-2-1	Adjusts DARK of Cyan, Magenta, Yellow
YELLOW OR BLACK		or Black TRC.
DARK		Plus indicates adjustment toward a
		darker level and minus toward lighter.

SETTING UP > 49