LCD Message
DISK FILE OPERATION FAILED
DISK FILESYSTEM IS FULL
DISK FULL
EEPROM INITIALIZE ERROR
EMPTY
ERROR POSTSCRIPT
FATAL ERROR
FUSER UNIT MISSING
INSTALL ADDITIONAL MEMORY
INSTALL NEW IMAGE DRUM
INSTALL NEW TONER
INSTALL PAPER CASSETTE
INVALID DATA
LOAD
MEDIA MISMATCH
NEAR END
NETWORK ERROR
OFFLINE
ONLINE
OPEN UPPER COVER
PLEASE POWER OFF
POWER SAVE
PRINTING
PROCESSING
RAM CHECK
REGISTRATION ADJUST TEST
REGISTRATION ERROR
REMOVE THE PAPER
RS232C FRAMING ERROR
Meaning
Error with hard disk operations.
Hard disk/flash memory full.
The internal hard drive is full.
Call for service.
Indicates which paper tray is empty.
A PostScript error has occurred.
Call for service.
Fuser unit is missing.
Additional memory is required before job can be printed.
Install a new image drum. Colour will be indicated.
Install a new toner cartridge. Colour will be indicated.
Install the paper cassette. Paper tray will be indicated.
Data is incorrect.
Load correct paper size/type. Size/type will be indicated.
Paper type set via menu does not match that sent via driver.
The paper in the selected ***** is nearly finished (***** indicates paper tray).
Network error.
Shows
Shows
Open the upper cover.
Printer must be switched off after disk/flash initialisation.
The printer is in powersave mode.
Data is being printed.
Data is being processed.
RAM is being checked after switching printer on.
Registration adjustment being tested.
An error has occurred setting up the registration.
Indicates wrong paper being used.
Serial framing error. Check configuration of serial card.
TROUBLESHOOTING > 172
