PRINTOUT IS GARBLED OR INCORRECT WITH PARALLEL CONNECTION.
Possible cause | Remedy |
|
|
Possible mismatch on | Change parallel transmission mode (see Parallel |
parallel connection | Transmission Mode above). |
between computer and |
|
printer. |
|
CANNOT PRINT.
LPT write error displayed.
PRNUSBx write error is displayed.
Possible cause | Remedy |
|
|
Interface is disabled. | In the printer menu settings, enable Parallel or USB |
| interface. |
|
|
Printer is switched OFF. | Switch ON. |
Printer interface cable is | Reconnect the printer interface cable. |
disconnected. |
|
A converter, buffer, extension cable or USB hub is being used.
Test by connecting the printer and computer directly.
Printer driver output port | Set correct output port to which the printer interface cable |
is incorrect. | is connected. |
|
|
Printer is not selected in | Select the printer or set to default printer. |
the printer driver. |
|
Incorrect printer driver is | Delete this printer driver and install correct printer driver. |
being used. |
|
