ACCESSORIES

NETWORK INTERFACE CARD

The network interface card is an Ethernet board that supports EtherTalk, TCP/IP, IPX/SPX, IPP, SNMP, NDS and NetBEUI protocols. It can be connected using 10/100BASE-TX.

1.Turn off the printer and disconnect the power cable.

2.Loosen the two screws and remove the cover (1) from the lower option slot.

3.Insert the network interface card (2) into the option slot and secure with the two thumbscrews (3).

4.Connect the power cable and switch on the printer.

ACCESSORIES > 193

Page 193
Image 193
Oki 7100 manual Accessories, Network Interface Card