Item | Value | Description |
|
|
|
CMY 100% DENSITY | Disable; enable | Selects enable/disable 100% output |
|
| against the CMY100% TRC |
|
| compensation. Ordinarily, the TRC |
|
| compensation function controls the |
|
| appropriate print density; thus, 100% |
|
| output is not always enabled. |
|
| Selecting ENABLE will allow 100% |
|
| output. In actual printing, the TCR |
|
| values, too, are controlled by Colour |
|
| Matching. This function is used for |
|
| special purposes; for example, to |
|
| specify the colour for CMYK colour |
|
| space in PS. |
System configuration menu |
| |
|
|
|
Item | Value | Description |
|
|
|
POWER SAVE | 5 min; 15 min; 30 min; | Sets the time before printer enters |
DELAY TIME | 60 min; 240 min. | power save mode. |
|
|
|
PERSONALITY | Auto emulation; PCL; | Selects the printer emulation |
| IBM PPR III XL; Epson | language. Note: the only printer |
| FX; Adobe PostScript; | languages that can be selected are |
| those enabled in the Personality | |
|
| section of the Maintenance menu. |
USB | ASCII | Specifies PostScript (PS) |
RAW | communication protocol mode of data | |
|
| from USB. (In RAW mode, |
|
| invalid.) |
|
|
|
IEEE 1394 | ASCII | Displayed only when IEEE1394 option |
PS PROTOCOL | RAW | board is installed. |
|
| Specifies PS communication mode of |
|
| data from IEEE1394. |
|
| (In RAW mode, |
NETWORK | ASCII | Displayed this Item when OkiLAN |
PS PROTOCOL | RAW | 7300e is installed. |
Specifies PS communication protocol mode of data from OkiLAN 7300e . (In RAW mode,