Parallel menu
Item | Value | Description | |
|
|
|
|
PARALLEL | Enable; Disable | Selects parallel (Centronics) interface. | |
|
|
|
|
Enable; Disable | Selects | ||
ECP | Enable; Disable | Selects ECP mode. | |
|
|
|
|
ACK WIDTH | Narrow (0.5µs); Medium | Sets ACK width for compatible | |
| (1.0µs); Wide (3.0µs) | reception. | |
ACK/BUSY |
| Sets output order for ACK and BUSY | |
TIMING | during reception. | ||
|
| ACK IN BUSY: BUSY=LOW to the end of | |
|
| the ACK pulse. | |
|
| ACK WHILE BUSY: BUSY=LOW to the | |
|
| Centre of the ACK pulse. | |
|
|
|
|
3 | Sets or disables the | ||
| sec; Disable |
|
|
OFFLINE RECEIVE | Enable; Disable | When set to Enable, this function | |
|
| maintains reception without changing | |
|
| the interface signal, even though an | |
|
| alarm occurs. | |
|
| The interface stays open even if the | |
|
| operator panel | |
|
| pressed. | |
|
| The interface issues a BUSY signal | |
|
| only when the receive buffer is full or | |
|
| when a service call occurs. | |
USB menu |
|
|
|
|
|
| |
Item | Value | Description |
|
|
|
|
|
USB | Enable; Disable | Selects USB interface. | |
|
|
|
|
SOFT RESET | Enable; Disable | Selects use of soft reset command. | |
OFFLINE RECEIVE | Enable; Disable | When set to Enable, this function |
|
|
| maintains reception without changing | |
|
| the interface signal, even if an alarm | |
|
| occurs. The interface stays open even | |
|
| if the operator panel | |
|
| pressed. The interface issues a BUSY | |
|
| signal only when the receive buffer is | |
|
| full or when a service call occurs. | |
