Palm m100 manual Identifies the port that Palm Desktop software

Serial Port	Identifies the port that Palm Desktop software
	uses to communicate with the HotSync cable.
	The Palm Desktop installation software
	automatically detects the number of the port to
	which you connected the cable. If necessary,
	you can change the port selection.
	Note: Your handheld cannot share this port
	with an internal modem or other
	device. See “Palm m100 components”
	in Chapter 1 if you have trouble
	identifying the serial port.
Speed	Determines the speed at which data is
	transferred between your handheld and Palm
	Desktop software. Try the As Fast As Possible
	rate first, and adjust downward if you
	experience problems. This setting allows Palm
	Desktop software and your handheld to find
	and use the fastest speed.

5.Click the Modem tab to display the modem settings and adjust the options as needed. See “Conducting a HotSync operation via modem” later in this chapter for more information.

6.Click OK.

To set the HotSync options on a Macintosh:

1.Double-click the HotSync Manager icon in the Palm folder.

2.Click the HotSync Controls tab and select any of the following options:

Page 119 Advanced HotSync® Operations