Setup

Identifies the setup string for your particular

String

modem. Not all modems require a setup string.

 

Refer to your modem manual and enter the setup

 

string if recommended by the manufacturer.

4. Click OK.

 

To prepare a Macintosh for a modem HotSync operation:

1.Confirm that the Macintosh modem is connected and turned on, and that no communications applications, such as fax or telephony software, or AppleTalk networking are running on that serial port.

Note: Make sure the Macintosh is disconnected from all online services, such as CompuServe and America Online (AOL). This helps to avoid conflicts with the serial port.

2.Double-click the HotSync Manager icon in the Palm folder.

3.Click the Serial Port Settings tab.

4.Under Check for handheld connection using, click Modem Setup.

5.Adjust the following options as needed.

Modem

Identifies the type of modem connected to your

 

Macintosh. If your modem does not appear on

 

the list, use the Hayes Basic setting, or choose

 

Custom to enter a command string. Refer to the

 

manual that came with your modem to find the

 

appropriate command string.

Chapter 5

Page 134

Page 140
Image 140
Palm m100 manual Identifies the setup string for your particular