Check for a connection using
Local Setup
Select the method you use to synchronize your handheld and your desktop applications:
Synchronizes while your handheld and HotSync cable are connected to this Macintosh, or while using infrared communication to synchronize with this Macintosh.
Synchronizes while your handheld communicates to this Macintosh across a telephone line.
Both Setups. Synchronizes using the HotSync cable, infrared communication, or through the modem; HotSync Manager monitors both connections for communication from a handheld.
Note: Choosing Both Setups prevents you from using either port for other operations such as printing, faxing, or AppleTalk networking.
Enables you to perform HotSync operations using the HotSync cable that is connected to your Macintosh. Set the following options:
■Speed. Determines the speed at which data is transferred between your handheld and Palm Desktop software. Try the As Fast As Possible rate first, and adjust downward if you experience problems. This setting allows Palm Desktop software and your handheld to find and use the fastest speed.
■Port. Identifies the port that Palm Desktop software uses to communicate with the HotSync cable. Select the modem or printer port where you connected the HotSync cable.
Page 121 | Advanced HotSync® Operations |
