Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P Playing back clips, Changing thumbnails, Switching the thumbnail display, awsq, [EXIT], [SETUP], [ALL CLIP], [SLOT CLIPS], [MARKED CLIPS], b: <EXIT> button

	Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
a: <THUMBNAIL> button	d: <THUMBNAIL MENU> button
b: <EXIT> button	e: <SHIFT> button

c:awsqcursor buttons r<SET> button

Playing back clips1Press the <THUMBNAIL> button.The thumbnail screen appears on the viewfinder screen.2 Use the cursor buttons to move the pointer over the desired clip.3Press the <PLAY/PAUSE> button.ffThe clip under the pointer will be played back on the viewfinder screen.

ffAfter playback of the clip under the pointer has ended, subsequent clips are played back in order on the thumbnail screen, and when playback of the last clip ends, view returns to the thumbnail screen.

@@NOTE

ttWhen playing back clips it is not necessary to select the clips (blue frames around the thumbnails).

ttClips with clip numbers displayed in red* cannot be played.

* The not playable clip indicator is displayed when [B/W] is selected with the [EVF TYPE] item on the setting menu [DISPLAY SETUP] screen.

ffDuring playback of clips, press the <%/REW> button to start 4x speed reverse playback, and the <FF/)> button to start 4x speed fast playback. Press the <PLAY/PAUSE> button to return to normal playback.

ffDuring playback of clips, press the <PLAY/PAUSE> button to pause the playback.

During a pause, press the <%/REW> button to pause the playback at the beginning of the clip. Press the <%/REW> button again to pause the playback at the beginning of the previous clip.

During a pause, press the <FF/)> button to pause the playback at the beginning of the next clip.

ffPressing the <STOP> button during clip playback stops the playback and returns the display to the thumbnail screen.

@@NOTE

ttWhen playback is stopped, the position of the pointer moves to the clip that was being played back, regardless of where the playback started.

ttPress the <PLAY/PAUSE> button again to start playback from the beginning of the clip under the pointer. To continue to play back from where previously stopped, turn the [PLAYBACK RESUME] setting in “Setting the thumbnail display” (page 113) to [ON].

Switching the thumbnail display

The display can be switched so that only those clips matching the specified conditions are displayed on the thumbnail screen.

1Press the <THUMBNAIL> button.

The thumbnail screen appears on the viewfinder screen.

2 Press the <THUMBNAIL MENU> button.The thumbnail menu appears.<THUMBNAIL MENU> button

3Select [THUMBNAIL] from the thumbnail menu. Switch the thumbnail display by selecting one of the items.

[ALL CLIP]	Displays all clips.
[SAME FORMAT CLIPS]	Displays clips of the current system format.
[SELECTED CLIPS]	Displays randomly selected clips. The
	thumbnails appear in selected order.
[MARKED CLIPS]	Displays clips with shot marks attached.
[TEXT MEMO CLIPS]	Displays clips with text memo data.
[SLOT CLIPS]	Displays clips recorded in the P2 card
	inserted in the specified slot.
	When [SLOT CLIPS] is selected, [SLOT1] to
	[SLOT2] are displayed as a sub-menu, select
	the desired slot to display the clips.
[SETUP]	Refer to “Setting the thumbnail display”
	(page 113) for information about this item.
[EXIT]	Closes the sub-menu.

Changing thumbnails

Replace thumbnails with images that include previously attached text memos while images are recorded or played back.

1Add text memos to images to be changed.

For details on adding text memos, refer to “Text memo recording function” (page 45).

3Place the pointer on the clip of the thumbnail to be changed and press the <SET> button, and then move the pointer to the text memo display on the lower row.

2 Select the thumbnail menu → [THUMBNAIL] → [TEXT MEMOCLIPS] to display thumbnails of the clips with text memos.

– 106 –