Chapter 2 Description of Parts — Shooting and recording/playback functions section

Set the switch to this position when you have no time to adjust the white balance.

ffThe factory setting is 3200 K.ffThe color temperature can be changed successively to

<PRST> 3200 K, 5600 K, and the user-specified variable value by the setting menu or by pushing the <AUTO W/B

BAL> switch towards the <AWB> side, and pushing the <AUTO W/B BAL> switch towards the <AWB> side again while the color temperature is displayed. The variable value can be set at SmartUI. (page 140)

Pressing the <AUTO W/B BAL> switch towards <AWB> <A>/<B> automatically adjusts the white balance and saves the

adjusted value to memory A or B.

You can also assign the auto tracking white balance (ATW) function to <B> in the setting menu. (page 54)

9Focal plane index <>Indicates the focal plane of the MOS sensor.

It provides a reference for making accurate focal distance measurements from the subject.

33

27 26

31

25 24

11

 

HOLD

COUNTER

RESET MONITOR SEL

 

LIGHT

16

 

TC NDF SLAVE P -REC

 

CAM

 

 

 

17

 

E

F

 

 

0

AUDIO

 

 

 

-30

 

18

13

MEDIA

CH1

 

 

-10

 

 

 

 

A

 

-20

 

 

BATT

CH2

 

 

dB

SETUP

19

14

E

F

1 2

 

HOME

12

/REW

STOP

FF/ PLAY/PAUSE

 

 

20

 

KEY LOCK

THUMBNAIL

 

 

 

21

 

 

 

 

15

 

 

 

SET

TOP

SHIFT

 

 

 

EXIT

MULTI SEL

MENU

 

 

 

 

 

 

 

 

 

 

CANCEL BOTTOM

 

 

22 23

rr Shooting and recording/playback functions section (Recording unit)

10<REC> button (page 36)

Press this button to start recording, and press again to stop recording. This button has the same function as the VTR button on the lens side.

11<MONITOR SEL> button

Switch the audio channel that is output to the speaker, the <PHONES> terminal, and the <AUDIO OUT> terminal to [CH1/2] or [CH3/4] each time you press the button. The channel display of the audio channel level meter is switched together.

When the screen other than the [HOME] screen of SmartUI is displayed, the function corresponding to each setting screen is executed.

12<%/REW> (rewind) button

Press this button during a pause to perform fast-reverse playback. Press it during playback to perform fast-reverse playback at approximately 4x speed.

If it is pressed with playback paused, the clip being played back is paused at its start point (cued state).

When the screen other than the [HOME] screen of SmartUI is displayed, the function corresponding to each setting screen is executed.

10

28

29

30

32

13<FF/)> (fast forward) buttonPress this button during a pause to perform fast playback.

Press it during playback to perform fast playback at approximately 4x speed.

If it is pressed with playback paused, the clip being played back is paused at the start point of the next clip (cued state).

When the screen other than the [HOME] screen of SmartUI is displayed, the function corresponding to each setting screen is executed.

14<STOP> (stop) buttonPress this button to stop playback.

Also press it to stop interval recording and one-shot recording, or to end combining of clips in one-clip recording.

When the screen other than the [HOME] screen of SmartUI is displayed, the function corresponding to each setting screen is executed.

15<PLAY/PAUSE> (play/pause) button

Press this button to view the playback image using the viewfinder screen or the monitor screen.

Pressing this button during playback pauses playback. When the screen other than the [HOME] screen of SmartUI is displayed, the function corresponding to each setting screen is executed.

16<LIGHT> button

Control lighting of SmartUI. Each press toggles lighting of SmartUI on and off.

– 24 –