Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P [RECORDING SETUP] screen

Chapter 7 Menu Operations — Menu list

Item		Description of settings		Remark
WFM	Selects the type of waveform to be displayed on the viewfinder screen when the
	<USER> buttons (<USER MAIN>/<USER1>/<USER2>) to which the waveform
	monitor function is assigned is pressed.
	[WAVE]	Displays as a waveform.
	[VECTOR]	Displays as a vector.
	[WAVE/VECT]	Changes display in order of [OFF] → [WAVE] → [VECTOR] →
		[OFF] each time the button is pressed.
AUTO KNEE SW	Selects the function for the <OUTPUT>/<AUTO KNEE> selector switch.		ffWhen 1080i and progressive mode are set, the
	[DRS]	Activates the dynamic range stretcher function when the	dynamic range stretcher function is not activated
			even if [DRS] is selected, and the auto knee
		<AUTO KNEE> selector switch is set to <ON>. (page 13)
			function activated when [ON] is selected operates.
	[ON]	Activates the auto knee function when the <AUTO KNEE>
			ffWhen the dynamic range stretcher function is
		selector switch is set to <ON>.
			activated, the digital zoom function is disabled.
	[OFF]	Does not activate the auto knee function when the <AUTO
		KNEE> selector switch is set to <ON>.
				indicates factory setting values.
[RECORDING SETUP] screen
Item		Description of settings		Remark
REC FUNCTION	Sets special recording mode. (page 41)		ffThis setting is not available in the following cases:
			- The [REC SIGNAL] item is set to [SDI IN].
	[NORMAL]	Does not perform special recording.
			- Native recording is set with the [REC FORMAT]
	[INTERVAL]	Sets interval recording.	item.
			- The [SYSTEM MODE] item is set to
	[ONE SHOT]	Sets one-shot recording.	[1080‑59.94i] or [480‑59.94i], and the [CAMERA
			MODE] item is set to [24P] or [24PA].
	[LOOP]	Sets loop recording.
			- Clip connection is underway with one-clip
			recording.
	ffIt is always set to [NORMAL] when the power is turned on.
			- The [VFR] item is set to [ON].
ONE SHOT TIME	Sets the recording time of one-shot recording. (page 42)		ffThis setting is available only when the [REC
	[1frm], [2frm], [4frm], [8frm], [16frm], [1s]		FUNCTION] item is set to [ONE SHOT].
INTERVAL TIME	Sets the interval time for interval recording. (page 41)		ffThis setting is available only when the [REC
	[2frm], [4frm], [8frm], [16frm], [1s], [2s], [5s], [10s], [30s], [1min], [5min],		FUNCTION] item is set to [INTERVAL].
	[10min]
START DELAY	Delays the start of interval recording and one-shot recording approximately one		ffThis setting is available only when the [REC
	second.		FUNCTION] item is set to [INTERVAL] or [ONE
	[ON], [OFF]		SHOT].
PREREC MODE	Sets the pre-recording mode. (page 41)		ffThis setting is not available in the following cases:
	[ON], [OFF]		- The [REC SIGNAL] item is [SDI IN].
			- The [VFR] item is set to [ON].
			Excluding the case when the frame rate and
			the number of frames of recording playback are
			matched (30P:30PN, 25P:25PN, 24P:24PN)
			- The [REC FUNCTION] item is set to other than
			[NORMAL].
ONE CLIP REC	Sets one-clip recording mode. (page 43)		ffThis setting is not available in the following cases:
	[ON], [OFF]		- The [REC FUNCTION] item is other than
			[NORMAL].
			- The [REC SIGNAL] item is [SDI IN].
			- The [VFR] item is [ON].
			Excluding the case when the frame rate and
			the number of frames of recording playback are
			matched (30P:30PN, 25P:25PN, 24P:24PN)
START TEXT MEMO	Sets the function that automatically adds a text memo at recording start position		ffThis setting is not available when the [REC
	each time recording is started.		FUNCTION] item is other than [NORMAL].
	[ON], [OFF]		ffText memos added when the [START TEXT
			MEMO] item is [ON] indicate recording start
			position.
			To record text memos as character information,
			refer to “Setting clip metadata” (page 110).
TC MODE	Sets count compensation for the built-in time code generator of the camera.		ffThis setting is not available when activating in
	(page 68)		[24P], [24PA], or [24PN]. Counting is always
	[DF]	Counts in drop frame mode.	performed in the non-drop frame mode.
	[NDF]	Counts in non-drop frame mode.
UB MODE	Sets the content to be recorded in user bits. (page 66)
	[USER], [TIME], [DATE], [EXT], [TCG], [FRM.RATE]
				indicates factory setting values.

– 126 –