Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P [OFF], Screen, [WB VAR], [1] - [60], [VFR] (OP4), [ON], [OFF], [F.RATE] (OP4), Corresponding button, [2.4K] to [3.2K]to [9.9K]

Chapter 8 Using SmartUI — Menu list

Screen	Corresponding button	Setting details and setting value
CAM03:SETUP	Configures the white balance variable value and variable frame rate (VFR).
		[VFR] (OP4)	[ON], [OFF]
		Toggles the variable frame rate on/off.
		ffThis setting is not available when the setting
		menu on the viewfinder screen is open.
		ffOther conditions where the setting is not
	<%/REW> button	available are same as the setting menu [VFR]
		item on the viewfinder screen.
		ffDuring recording, operation is not changed even
		if the setting is changed. The setting is applied
		after recording is completed (and after clip
		connection is completed in one clip recording).
	<FF/)> button	[−]
		Decreases the setting value of the selected item.
	<PLAY/PAUSE> button	[+]
		Increases the setting value of the selected item.
		[→]
		Moves the item selection to the right. When the item selection moves to the right edge, it moves back to
		the left edge.
		[F.RATE] (OP4)	[1] - [60]
		Sets the variable frame rate.	The available maximum frame rate value varies
		ffThis setting is not available when the setting	depending on the settings.
		menu on the viewfinder screen is open.
		ffOther conditions where the setting is not
	<MONITOR SEL> button	available are same as the setting menu [FRAME
		RATE] item on the viewfinder screen.
		ffDuring recording, operation is not changed even
		if the setting is changed. The setting is applied
		after recording is completed (and after clip
		connection is completed in one clip recording).
		[WB VAR]	[2.4K] to [3.2K] to [9.9K]
		Specifies the color temperature for the variable
		function where any color temperature can be
		specified.
				indicates factory setting values.

– 140 –