Chapter 12 Specification — Dimensions and specifications

 

 

Digital audio

 

 

 

Recording audio signal

AVC‑Intra 100/AVC‑Intra 50/DVCPRO HD

 

48 kHz/16 bits, 4ch

 

DVCPRO50

 

48 kHz/16 bits, 4ch

 

DVCPRO/DV

 

48 kHz/16 bits, 2ch/4ch switch

Headroom

20 dB/18 dB (switchable menu)

 

 

Video input/output

 

 

 

<SDI OUT/IN (OP)> terminal

HD SDI = BNC⋅1, 0.8 V [p-p], 75 Ω

 

SD SDI = BNC⋅1, 0.8 V [p-p], 75 Ω

 

When the HD/SD SDI input board (extra-cost option) is installed, the SDI input function is available (switched the SDI input

 

in the menu).

<MON OUT> terminal

HD SDI = BNC⋅1, 0.8 V [p-p], 75 Ω

 

SD SDI = BNC⋅1, 0.8 V [p-p], 75 Ω

 

VBS = BNC⋅1, 1.0 V [p-p], 75 Ω (Can be switched to HD SDI/SD SDI/VBS with the SmartUI setting.)

<HDMI> terminal

HDMI⋅1 (HDMI type A terminal, not compatible with VIERA Link)

 

 

Audio input/output

 

 

 

<MIC IN> terminal

ffXLR (3-pin)⋅1

 

- +48 V supporting menu

 

- −40 dBu/−50 dBu/−60 dBu (switchable menu)

<AUDIO IN> terminal

ffXLR (3-pin)⋅2

 

Input high impedance, <LINE>/<MIC> (switch)

 

- LINE: 0 dBu

 

- MIC: −50/−60 dBu (menu), MIC+48 V ON/OFF (switch)

WIRELESS IN terminal

25-pin, D-SUB, −40 dBu, 2ch supported

<AUDIO OUT> terminal

Pin jack⋅2 (CH1, CH2), output: 316 mV, 600 Ω

Speaker

20 mm diameter, round⋅1

 

 

Other input/output

 

 

 

<GENLOCK IN> terminal

BNC⋅1, 1.0 V [p-p], 75 Ω

<TC IN/OUT> terminal

ffTC IN/OUT menu

 

- IN: BNC⋅1, 0.5 V [p-p] to 8 V [p-p], 10 kΩ

 

- OUT: BNC⋅1, 2.0±0.5 V [p-p], low impedance

<DC IN> terminal

XLR⋅1, 4-pin, DC 12 V (DC 11.0 V to 17.0 V)

<DC OUT> terminal

4-pin, DC 12 V (DC 11.0 V to 17.0 V), maximum output current 1.5 A

<REMOTE> terminal

10-pin

<LENS> terminal

12-pin

<VF> terminal

20-pin

<LAN> terminal*

100BASE‑TX/10BASE‑T

<USB2.0> terminal (device)

Placed on the right side of the body. Type B, 4-pin, USB ver.2.0 compliance

<USB2.0> terminal (host)

Placed on the right side of the body. Type A, 4-pin, USB ver.2.0 compliance

<USB2.0> terminal (host)*

Placed inside the cover on the left side of the body. Type A, 4-pin, USB ver.2.0 compliance, for attachment of the wireless

 

module AJ‑WM30

* When the upgrade software key AG‑SFU601G (network function (extra-cost option)) is installed, the network functions of the wired LAN and wireless LAN are enabled.

Options

Color viewfinder

AG‑CVF10G

Video encoder board

AG‑YDX600G

HD/SD SDI input board

AG‑YA600G

Wireless module

AJ‑WM30

Upgrade Software Key

AG‑SFU601G

Upgrade software key

AG‑SFU602G

– 171 –