Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P [DIAGNOSTIC] screen, Item, SOFT], [VUP], PACK], Remark, BOARD], [PROXY, BOARD], FUNC.], [SYSCON, [SDI IN, [VUP FS], [NETWORK, [P2CS KR], [P2CS AP], [BE FPGA]

Chapter 7 Menu Operations — Menu list

[DIAGNOSTIC] screen

Item		Description of settings	Remark
VERSION	Displays the version of all firmware in the camera.
	The version of each firmware can be checked by opening a sub-screen.
	(Sub-screen)
	[CAM SOFT]	Camera microcomputer software
	[SYSCON	System control microcomputer software
	SOFT]
	[P2CS BL2‑1]	P2 control microcomputer boot program 1
	[P2CS BL2‑2]	P2 control microcomputer boot program 2
	[P2CS KR]	P2 control microcomputer kernel
	[P2CS AP]	P2 control microcomputer application software
	[VUP]	System software for updating all firmware of the camera
	[VUP FS]	File system for updating the camera
	[CAM FPGA]	Camera FPGA configuration ROM
	[BE FPGA]	BE FPGA configuration ROM
	[PROXY SOFT]	Proxy board software version display (OP1)
	[PROXY FPGA]	Proxy board FPGA configuration ROM (OP1)
	[SDI IN FPGA]	FPGA configuration ROM of the SDI signal input board (OP2)
OPTION STATUS	Indicates whether there is an optional board, and displays activated status of the
	upgrade software key. The following items are displayed on the sub-screen.
	[SDI IN	--- (with board: [ACTIVE], without board: ---)
	BOARD]
	[PROXY	--- (with board: [ACTIVE], without board: ---)
	BOARD]
	[PRODUCTION	Activate: [ACTIVE]
	PACK]	No: [----]
	[NETWORK	Activate: [ACTIVE]
	FUNC.]	No: [----]
MODEL NAME	Displays the product name of the camera.
SERIAL NO.	Displays the serial number of the camera.
OPERATION	Displays the operation time of the camera.

– 134 –