Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P [PC/USB/LAN] screen, [PROXY SETTING] screen, Item, Item, [P2], MOV], Item, [ON], [OFF], [OFF], [RTP], [OFF], [LAN], Remark, Remark, [HTTP], Remark, [WLAN]

Chapter 7 Menu Operations — Menu list

Item	Description of settings		Remark
FB ADJUST	Adjusts the lens flange back.	ffThis can be adjusted when an auto-focus
		compatible lens is attached.
			indicates factory setting values.

[PROXY SETTING] screen

Available when the video encoder board (extra-cost option) is mounted. Items are grayed out and cannot be selected when the board is not mounted.

Item		Description of settings		Remark
REC MEDIA (OP1)	Selects media for recording proxy data.		ffThis setting is not available in the following cases:
			- Clip connection is underway with one-clip
	[P2]	Records the proxy data to the P2 card.	recording.
			- The [REC FUNCTION] item is set to other than
			[NORMAL].
	[P2&SD]	Records proxy data in both the P2 card and SD memory card.
			- The [VFR] item is set to [ON].
			Excluding the case when the frame rate and
	[OFF]	Does not record proxy data.	the number of frames of recording playback are
			matched (30P:30PN, 25P:25PN, 24P:24PN)
REC MODE (1080)	Sets the proxy data recording mode when the 1080 mode is selected.		ffThis setting is not available when clip connection
(OP1)	[STD 2CH MP4], [SHQ 2CH MOV], [HQ 4CH MOV], [HQ 2CH MOV], [LOW 2CH		is underway with one-clip recording.
	MOV]
REC MODE (720)	Sets the proxy data recording mode when the 720P mode is selected.		ffThis setting is not available when clip connection
(OP1)	[STD 2CH MP4], [SHQ 2CH MOV], [HQ 4CH MOV], [HQ 2CH MOV]		is underway with one-clip recording.
REC MODE (SD)	Sets the proxy data recording mode only when SD mode is selected.		ffThis setting is not available when clip connection
(OP1)	[STD 2CH MP4], [LOW 2CH MOV]		is underway with one-clip recording.
TC SUPER (OP3)	Sets superimposition of time code display on proxy data recorded images.		ffThis setting is not available when clip connection
	[UPPER]	Superimposes time code on the upper area of recorded images.	is underway with one-clip recording.
	[LOWER]	Superimposes time code on the lower area of recorded images.
	[OFF]	Does not superimpose time code on recorded images.
STREAMING MODE	Selects the proxy streaming function.		ffIn the following cases, proxy streaming function
(OP1), (OP3)			is not activated even if set this item to [RTP] or
			[HTTP].
			- The [P2 BROWSE] item is [OFF].
			- The [REC MODE] item for proxy is neither [HQ
	[INHIBIT]	Stops the proxy streaming function.
			2CH MOV] nor [LOW 2CH MOV].
			- Proxy recording is set to be performed (the
			[REC MEDIA] item is [P2] or [P2&SD]), and the
			[PREREC MODE] item is set to [ON].
	[RTP]	Selects the RTP method.	ffIf the proxy streaming function is not activated,
			[STREAMING ERROR! SEE MODE CHECK
			DISPLAY] is displayed at the bottom of the
			viewfinder screen.
			The status can be checked by closing the menu
	[HTTP]	Selects the HTTP live streaming method.
			screen and pushing the <DISP/MODE CHK>
			switch towards the <CHK> side twice to display
			the [PROXY/NETWORK] screen of the mode
			check.
				indicates factory setting values.
[PC/USB/LAN] screen
Item		Description of settings		Remark
PC MODE SEL	Sets the operation mode of the camera when the [PC MODE] item is set to [ON],		ffThis setting is not available when the [PC MODE]
	and external devices (such as a hard disk drive and a computer) are connected		item is set to [ON].
	with USB 2.0.
	[USB HOST]	Selects the mode when using a hard disk drive by connecting to
		the camera with USB 2.0.
	[USB DEVICE]	Selects the mode when connecting the camera to a computer
		with USB 2.0, and using the P2 card as a mass storage.
		(page 146)
PC MODE	Operates the camera in the mode selected at the [PC MODE SEL] item.		ffThis setting is not available when clip connection
	[ON]	Operates in [PC MODE].	is underway with one-clip recording.
	[OFF]	Stops [PC MODE] and returns to normal operation.
	ffIt is always set to [OFF] when the power is turned on.
NETWORK SEL	Sets the connection method when making network connection between external		ffIf [PC MODE] is set to [ON] when OP3 is installed,
(OP3)	devices (such as a computer) and the camera.		the selected item is displayed in blue and cannot
	[WLAN]	Connects with wireless LAN.	be set.
	[LAN]	Connects with the <LAN> terminal.
				indicates factory setting values.

– 132 –