Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P [60], [50], [24], END], [SDIn], [SDI&], [ LACK], ***min], (option), 10Extender, System mode, [PROXY ERR], 5Information display, Displays system frequency

Chapter 4 Adjustments and Settings for Recording — Viewfinder status display

@@NOTE

tt[TC], [tc], and [UB] become white dropout display [] → [] when locked to TC IN input.

2Warning information display

[	]	Flashes when the P2 card is not inserted or recording is disabled.
[	FULL]	Flashes where there is no space remaining on the P2 card.
[ LACK]		Flashes when there is insufficient remaining space on the P2 card while loop recording is set.
[	]	Illuminated when the built-in battery for the internal clock is flat.
		For details, refer to “Charging the built-in battery” (page 156).

3HD SDI REMOTE recording status

ffThis indicates the recording start and stop control status for the external device connected by <SDI OUT/IN (OP)>. ffThis is displayed when the setting of the [HD SDI REMOTE] item on the setting menu [IN/OUT SEL] screen is [ON].

[SDIn]	Recording control instruction status for externally connected device
[SDI&]	Recording standby instruction status for externally connected device

4Recording format and system mode display

System mode	ff1080i
	ff1080 (1080‑23.98PsF mode)
	ff720P
	ff480i
	ff576i
Recording format	ffWhen the system mode is 1080i, 720P
	- [AVC‑I100]: AVC‑Intra 100 format
	- [AVC‑I50]: AVC‑Intra 50 format
	- [DVCPROHD]: DVCPRO HD format
	ffWhen the system mode is 480i (576i)
	[DVCPRO50], [DVCPRO], [DV]

5Information display

The following information is displayed according to the status: ffAuto white balance and auto black balance operation status ffWarning displays, error displays

ffSwitch and button operation informationFor details, refer to “Information display in center” (page 77).6System frequency display Displays system frequency.

[60]When the system frequency set by the [SYSTEM MODE] item on the setting menu [SYSTEM SETUP] screen is 59.94 Hz

[50]When the system frequency set by the [SYSTEM MODE] item on the setting menu [SYSTEM SETUP] screen is 50 Hz

[24](option) When the system frequency set by the [SYSTEM MODE] item on the setting menu [SYSTEM SETUP] screen is 23.98 Hz

7Proxy information display (option):Displayed when the video encoder board (extra-cost option) is installed.

[		END]	Flashes white when there is less than one minute of recording space left. It is displayed during recording.
[	***min]		Displayed only during a mode check executed on the proxy SD memory card capacity.

[PROXY ERR] Displayed when an error has occurred on the video encoder board or in proxy recording.

8Letterbox recording display

Displayed when the recording format is 480i or 576i, and [LETTER BOX] is selected at the [ASPECT CONV] item on the setting menu [SYSTEM SETUP] screen is selected and letterbox recording is being executed.

9Y GET brightness display

In the Y GET mode, the image level in the frame displayed near the center of the screen is displayed as 0% to 109%.

10ExtenderDisplays [EX] when the lens extender is used.11Recommended ND filter displayDisplays the ND filter recommended for the current shooting conditions.

– 74 –