Chapter 8 Using SmartUI — Menu list

Screen

Corresponding button

Setting details and setting value

SET02:MON/HDMI

Sets the formats of video output from the <MON OUT> and <HDMI> terminals.

 

 

 

FORMAT

 

[MON][AUTO] (HDMI:[1080i/720P])

 

 

 

 

Sets the signal format type output from the <MON

Displayed only in the HD mode.

 

 

OUT> terminal.

The SDI signal is output according to the setting

 

 

With this setting, the signal format to be out put

of the [SYSTEM MODE] item on the setting menu

 

 

from the <HDMI> terminal is also switched.

[SYSTEM SETUP] screen.

 

 

 

ffThe 1080i or 720P signal is also output from the

 

 

 

<HDMI> terminal according to the [SYSTEM

 

 

 

MODE] item setting.

 

 

 

ffFor [1080‑23.98PsF], the signal pulled down to

 

 

 

1080/59.94i is output from both <MON OUT> and

 

 

 

<HDMI> terminals.

 

 

 

[480i] or [576i] (HDMI:[480P] or [576P])

 

 

 

Displayed only in the HD mode.

 

<%/REW> button

 

The SDI signal of 480i or 576i is output.

 

 

 

ffThe 480P or 576P signal is output from the

 

 

 

<HDMI> terminal.

 

 

 

[SDI] (HDMI:[480P] or [576P])

 

 

 

Displayed only in the SD mode.

 

 

 

According to the setting of the [SYSTEM MODE]

 

 

 

item on the setting menu [SYSTEM SETUP] screen,

 

 

 

the SDI signal of 480i or 576i.

 

 

 

ffThe 480P or 576P signal is output from the

 

 

 

<HDMI> terminal.

 

 

 

[VBS] (HDMI:[480P] or [576P])

 

 

 

A composite video signal is output.

 

 

 

ffThe 480P or 576P signal is output from the

 

 

 

<HDMI> terminal.

 

 

[D.CON][CROP]

 

 

Sets the aspect for the down-conversion output

Side-crop mode (Crops the left and right edges.)

 

 

signal in the HD mode. This item is not displayed in

[L.BOX]

 

 

the SD mode.

 

<STOP> button

Letterbox mode (Adds black bands at the top and

 

 

 

 

 

bottom of the image.)

 

 

 

[SQU]

 

 

 

Squeeze mode (Squeezes images horizontally.)

SET03:MON/HDMI

Sets the output setting of the <MON OUT> and <HDMI> terminal.

 

 

 

SETUP

 

[OUT]

[ON], [OFF]

 

 

 

<%/REW> button

Enables or disables the output from the <MON

 

 

 

 

 

OUT> terminal.

 

 

 

 

 

[CHR]

[ON], [OFF]

 

 

Specifies whether characters are superimposed

 

 

 

 

<STOP> button

over the output from <MON OUT>, <HDMI>, and

 

 

 

 

<REMOTE> terminals.

 

 

 

 

 

 

 

 

 

 

This setting is disabled when a remote control unit (AG‑EC4G) is connected, and the settings on the

 

 

remote control unit or extension control unit supersede.

 

 

[ZBR]

[ON], [OFF]

 

 

Specifies whether the zebra pattern is

 

 

 

 

<FF/)> button

superimposed over the output from <MON OUT>,

 

 

 

 

<HDMI>, and <REMOTE> terminals.

 

 

 

 

 

 

 

 

 

 

ffThis setting is not available when the setting

 

 

 

 

 

menu on the viewfinder screen is open.

 

 

 

SET04:LCD

Performs the display settings of SmartUI.

 

 

 

 

 

[]

 

 

 

 

<FF/)> button

Decreases the setting value of the selected item. Press and hold this button to continuously decrease the

 

 

setting value.

 

 

 

 

<PLAY/PAUSE> button

[+]

 

 

 

 

Increases the setting value of the selected item. Press and hold this button to continuously decrease the

 

 

setting value.

 

 

 

 

<RESET> button

[RST]

 

 

 

 

Resets the setting value of the selected item to its factory setting value.

 

 

 

 

[]

 

 

 

 

 

Moves the item selection to the right. When the item selection moves to the right edge, it moves back to

 

 

the left edge.

 

 

 

 

 

[BACK LIGHT]

[1] ... [3] ... [5]

 

 

 

 

Sets the luminance of SmartUI.

 

 

 

 

<MONITOR SEL> button

[CONTRAST][0] ... [33] ... [63]

 

 

Sets the contrast of SmartUI.

 

 

 

 

 

ff The SmartUI screen may be hidden depending

 

 

 

 

 

on the setting value.

 

 

 

 

 

In such a case, press the <HOME> to return to

 

 

 

 

 

the [HOME] screen and hold down the <LIGHT>

 

 

 

 

 

and <RESET> buttons. The setting value of

 

 

 

 

 

[CONTRAST] is reset to the factory setting.

 

 

 

 

 

 

 

 

indicates factory setting values.

– 144 –