Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P Setting whether to record the uploaded metadata, Selecting the [USER CLIP NAME] recording method, Clip, Clip, rr [TYPE2], [COUNT] value, [COUNT] value

Chapter 6 Thumbnail Operations for Clips — Thumbnail operations

ffA software keyboard screen is displayed, allowing you to modify the setting.

ffWhile holding down the <SHIFT> button, press the cursor up or down button (`/{) to move to the start or end of the content to change.

Setting whether to record the uploaded metadata

From the thumbnail menu, select [META DATA] → [RECORD] item, and set it to [ON]/[OFF]. This item is set to [OFF] in the factory settings.

Selecting the [USER CLIP NAME] recording method

From the thumbnail menu, select [META DATA] → [USER CLIP NAME], and select the recording method of [USER CLIP NAME] from either [TYPE1] or [TYPE2].

rr [TYPE1] (factory setting)

Status of clip metadata	[USER CLIP NAME] to be recorded
When clip metadata has been loaded	Uploaded data
When no clip metadata has been loaded, or when setting disables recording of loaded clip	Same as [GLOBAL CLIP ID] (UMID data)
metadata
rr [TYPE2]
Status of clip metadata	[USER CLIP NAME] to be recorded
When clip metadata has been loaded	Uploaded data + [COUNT] value*
When no clip metadata has been loaded, or when setting disables recording of loaded clip	Same as [CLIP NAME]
metadata

*The [COUNT] value is indicated as a four digit number.

The [COUNT] value is incremented each time a new clip is captured if clip metadata has been read in and [TYPE2] has been selected as the recording method. The [COUNT] value can be reset using the following method.

Select [META DATA] → [PROPERTY] from the thumbnail menu, and select the [USER CLIP NAME] item to display the following screen. Move the cursor over [COUNT RESET], and press the <SET> button to reset the [COUNT] value to 1.

@@NOTE

ttWhen a P2 card with a memory capacity of 8 GB or more is used in the camera, and a one-time continuous recording exceeds the prescribed duration (DVCPRO HD and AVC‑Intra 100: approximately five minutes; DVCPRO50 and AVC‑Intra 50: approximately ten minutes; DVCPRO or for DV: approximately 20 minutes), or when a one-time recording extends over more than one P2 card, the recording concerned will automatically be recorded as a separate clip. At this time, each clip will be provided with its own [COUNT] value.

rr Example of recording ([DVCPROHD]) a clip on a single P2 card

Start recording				Recording pause
		Recording duration = Approx. 7 min.
		Clip 1		Clip 2
		[COUNT] value		[COUNT] value
	= 0001		= 0002
		Approx. 5 min.		Approx. 2 min.

– 112 –