Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P [REC, VITC, [REC, MODE], MODE], MODE], MODE], RATE], SDI*1, [FRAME, TC OUT, [FRAME, IN/OUT, [SYSTEM, [CAMERA, SIGNAL], RATE]*1, [SYSTEM, [CAMERA, SIGNAL]

Chapter 4 Adjustments and Settings for Recording — Setting the time data

	System setting state				Recording TC		Output TC		Display TC
[SYSTEM	[REC	[REC FORMAT]	[CAMERA	[FRAME	LTC	VITC	TC OUT	LTC of HD	TC tc (24/30
MODE]	SIGNAL]		MODE]	RATE]*1				SDI, VITC	conversion)
	[CAMERA]				[R‑RUN]/
		[DVCPRO50]	[50i], [25P]	—	[F‑RUN]*2	Same value	LTC is output.		TC: 25 frames
					25 frames	as LTC
[576‑50i]		[DVCPRO/50i]						None
					[R‑RUN]/	(except, none
		[DV/50i]
	[SDI IN]		—	—	[F‑RUN]*5	at DV)	LTC is output.		TC: 25 frames
					25 frames

*1 This becomes valid when the production pack (extra-cost option) is installed.

*2 For free run, the time code is slaved to the input TC of the <TC IN/OUT> terminal.

*3 For free run, the time code is slaved when the input TC of the <TC IN/OUT> terminal is a non-drop frame. However, it cannot be slaved during recording.

*4 For free run, the time code is slaved to the value obtained by conversion to 24 frames when the input TC of the <TC IN/OUT> terminal is a 30-frame non-drop frame. However, it cannot be slaved during recording.

*5 For free run, the time code is slaved to the input TC of the <TC IN/OUT> terminal. It is not slaved to LTC or VITC of the SDI input signal.

*6 For free run, the time code is slaved when the input TC of the <TC IN/OUT> terminal is a non-drop frame of 24 frames. However, it cannot be slaved during recording.

*7 For free run, the time code is slaved to the input TC of the <TC IN/OUT> terminal. However, it cannot be slaved during recording.

Recording and output of user bits

	System setting state				Recording UB			Output UB
[SYSTEM	[REC		[CAMERA	[FRAME			UB of <TC	LTC UB of HD	VITC UB of HD SDI
		[REC FORMAT]			LTC UB	VITC UB	IN/OUT>
MODE]	SIGNAL]		MODE]	RATE]			terminal*1	SDI*1
			[60i], [30P]	—
				[1FRAME]
		[DVCPROHD/60i]	(60i)	to
				[30FRAME]
			[24P],	—
			[24PA]
		[AVC‑I100/60i]		[1FRAME]			LTC UB is output.
			—	to
	[CAMERA]	[AVC‑I50/60i]
				[30FRAME]
					Following [UB	Frame rate			Frame rate
[1080‑59.94i]				—
					MODE]*2	information			information
		[AVC‑I100/30PN]	—	[30FRAME]
		[AVC‑I50/30PN]		Other than
				[30FRAME]
		[AVC‑I100/24PN]		[24FRAME]			Output matched to over60i
			—	Other than
		[AVC‑I50/24PN]					based on LTC UB.
				[24FRAME]
	[SDI IN]	[DVCPROHD/60i]	—	—			LTC UB is output.
		[AVC‑I100/60i]
		[AVC‑I50/60i]
[1080‑23.98PsF]*3	—	[AVC‑I100/24PN]	—	—	Following [UB	Frame rate	LTC UB is output (native		Frame rate
		[AVC‑I50/24PN]			MODE]*2	information	output).		information
		[DVCPROHD/60P]	—	Other than
		[AVC‑I100/60P]		[24FRAME]
		[AVC‑I50/60P]	—	[24FRAME]			LTC UB is output.
	[CAMERA]	[DVCPROHD/30PN]	—	[30FRAME]
		[AVC‑I100/30PN]	—	Other than
[720‑59.94P]		[AVC‑I50/30PN]		[30FRAME]	Following [UB	Frame rate			Frame rate
		[DVCPROHD/24PN]	—	[24FRAME]	MODE]*2	information	Output matched to Over60P		information
		[AVC‑I100/24PN]		Other than
			—				based on LTC UB.
		[AVC‑I50/24PN]		[24FRAME]
	[SDI IN]	[DVCPROHD/60P]	—	—			LTC UB is output.
		[AVC‑I100/60P]
		[AVC‑I50/60P]
	[CAMERA]	[DVCPRO50/60i]	[60i], [30P]	—
			[24P],		Following [UB	Frame rate	LTC UB is
[480‑59.94i]		[DVCPRO/60i]		—				None	None
	[SDI IN]		[24PA]		MODE]*2	information	output.
		[DV/60i]
			—	—

– 65 –