Chapter 4 Adjustments and Settings for Recording — Setting the time data

1 <HOME> button2<COUNTER> button3 <SETUP> button4<HOLD> button1Use the <HOME> button to set the SmartUI screen to the [HOME] screen.

4

2

 

 

 

 

 

HOLD

COUNTER RESET MONITOR SEL

 

LIGHT

 

TC

NDF SLABE P -REC

 

CAM

 

 

 

 

 

0

AUDIO

 

 

 

 

 

-10

 

MEDIA CH1

 

 

 

 

A

 

-18

 

 

E

F

 

-20

 

 

1

2

-30SET UP

3

BATT

CH2

 

 

dB

 

 

E

F

 

 

 

 

 

 

 

 

 

 

HOME

 

/REW STOP FF/ PLAY/PAUSE

1

Item name

Description

[→]

The digit to be set (displayed inverted) moves to the

right.

 

[+]

The value of the inverted digit is incremented by one.

[−]

The value of the inverted digit is decremented by

one.

 

[RST]

The values of all digits are reset to 0.

2 Use the <COUNTER> button to set the counter display to [UB].3Use the <SETUP> button to set the SmartUI screen to the [SET01:TC/UB] screen.4 Set the [UBG] item to [SET].5Set the user bits.Retention of user bits in memory
6Press [UBG] to apply the user bit setting values and end setting of user bits.

@@NOTE

ttNewly set values are invalid if the screen is switched without pressing [UBG].

7Select [USER] at the [UB MODE] item on the setting menu [RECORDING SETUP] screen.

For details, refer to “Setting menu basic operations” (page 118).

User bit settings are automatically saved in memory and are retained even if the power is turned off.

Frame rate information recorded to user bits

If the frame rate value of video information to be shot and recorded based on the frame rate set by each item on the setting menu [SYSTEM SETUP] screen or by the [FRAME RATE] item (option) is recorded in the user bits, it can be edited the editing device (such as computer editing software).

This information is recorded to VITC UB at all times.

If the setting menu [UB MODE] item is set to [FRM.RATE], it is also recorded to user bits (LTC UB). In playback of clips recorded in native format, the same values as the frame rate information obtained by playing back recorded user bits are also output as HD SDI output signals or user bits of TC output from the <TC IN/OUT> terminal.

Frame rate information

The frame rate and video pull-down menu are linked to the time code and user bits as follows:

Checking information for the 6 digits at right Fixed valueSequence No. 24P, 24PA: 0 - 4Other than the above: Fixed at F
Media management information・Updated frame flag, valid frame flag・REC mark
Camera video mode Example)・60i：600・60P：608・30P：308・24P：248・24PA：24C・24PN：24C (Shooting)・＊＊ P：＊＊ 9 (720P/30PN or 60P VFR) ・＊＊ P：＊＊ D (720P/24PN VFR shooting)

– 67 –