Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P TC NDF SLAVE P -REC, SmartUI display ([HOME] screen), E F, 2 BATT CH2, 1 MEDIACH1 A, [TC], [tc], [UB], [FR], [DF], [NDF], [REC], [CLIP], [HOLD], [F‑RUN]

Chapter 2 Description of Parts — SmartUI display ([HOME] screen)SmartUI display ([HOME] screen)

45

TC NDF SLAVE P -REC

3

1 MEDIA CH1 AE F2 BATT CH2

E	F
		1	2

6

1Media remaining space indicator barIndicates the remaining free space in the P2 card using a 7-segment display.

Each segment is equivalent to three minutes, and the decreasing P2 card remaining time is indicated by the segments going out one segment at a time.

2Battery charge level indicator bar

When a battery with a digital indication (% indication) is used, all seven segments up to the F position light if the battery charge level is 70% or higher.

When the battery charge level falls below 70%, the segments go out one by one for each 10% drop.

3Audio channel level meter

One segment indicates 2 dB increment, with the smallest indication being −36 dB and the [OVER] indication displayed by (at the topmost position.

Each time you press the <MONITOR SEL> button, CH1/CH2, stereo, CH3/CH4 are switched, and the channel display of the level meter is switched together. (page 141)

Channels output to the monitor audio are displayed in white dropout. When the stereo is selected, both channels are displayed in white dropout.

4Time code indications

Each time you press the <COUNTER> button, the display changes in the order of [CLIP] → [TC] → [tc] → [UB] → [FR] → [CLIP] (viewfinder screen not displayed)* → [CLIP].

* The time code on the viewfinder screen is hidden.

[CLIP]	Indicates the counter value in
	hours:minutes:seconds.
[TC]	Indicates the time code value in
	hours:minutes:seconds:frames.
	Indicates the time code value in
[tc]	hours:minutes:seconds:frames. The frame is
	displayed after converting the frame digit to 24
	frames.
[UB]	Indicates the user bits value.
	Indicates the information of the frame rate at
	which recording is performed.
	[60I]	60i interlace mode (60 fields/sec)
	[60P]	60P progressive mode (60 frames/
		sec)
	[30P]	30P progressive mode (30 frames/
		sec)
	[24P]*	24P progressive mode (24 frames/
[FR]		sec)
	[24PA]*	24P advance mode (24 frames/sec)
	[50I]	50i interlace mode (50 fields/sec)
	[50P]	50P progressive mode (50 frames/
		sec)
	[25P]	25P progressive mode (25 frames/
		sec)
	* In the case of 24P and 24PA, the sequence
	number is indicated.

		[NDF]	Indicated when the time code is in the non-drop
			frame mode.
		[DF]	Indicated when the time code is in the drop
			frame mode.
		[HOLD]	Indicated when the time code generator/read
			value is held.
		[F‑RUN]	Indicated when the time code is set to advance
			continuously regardless of the recording
			operation.
		[R‑RUN]	Indicated when the time code is set to advance
			only during recording.
		[SLAVE]	Indicated when the time code is externally
			locked.
5	Recording mode display
		[REC]	Standard recording
		[P‑REC]	When pre-recording mode is set
		[i‑REC]	Interval recording setting
		[L‑REC]	Loop recording setting
6	Status information
		Audio level display	Indicates whether audio CH1/CH3 or CH2/CH4
			audio volume and audio level are in the auto
			adjustment mode. In the auto adjustment mode,
			[A] is displayed.
		Audio input	Indicates the input settings of audio CH1, CH2,
			CH3, and CH4.

At a USB connection Indicated when the [PC MODE] item on the setting menu [PC/USB/LAN] screen is set to [ON], and a device selected at [PC MODE SEL] is connected.

ffIn the USB host mode: [USB

HOST CONNECTED]/[USB HOST DISCONNECTED]

ffIn the USB device mode: [USB

DEVICE CONNECTED]/[USB DEVICE DISCONNECTED]

Error, card warning	Indicates the error code when something has
display	caused an error on the camera.

– 29 –