Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P Counter setting and display, Connecting and setting the generator lock and time code input/output, camera, camera, Time code, Item name, [GL PHASE]

Chapter 4 Adjustments and Settings for Recording — Setting the time data

rr When two cameras are connected and use one as a reference camera

Reference camera Slave camera

<TC IN/OUT> terminal	<TC IN/OUT> terminal
<MON OUT> terminal	<GENLOCK IN> terminal

ffSet whether to use the <TC IN/OUT> terminal as an output or input at the [TC IN/OUT SEL] item on the setting menu [IN/OUT SEL] screen.

ffSet the [TC VIDEO SYNC] item on the setting menu [IN/OUT SEL] screen to [RECORDING], and the [GL PHASE] item on the [OTHER FUNCTIONS] screen to [COMPOSITE] for both cameras.

ffIf the [TC VIDEO SYNC] item on the setting menu [IN/OUT SEL] screen is set to [RECORDING], the same time code can be added to the video which is recorded at the same time with both cameras.

ffThe sub-carrier of the VBS signal from the <MON OUT> terminal cannot be externally locked.

Connecting and setting the generator lock and time code input/output

			Setting of the	Generator lock input and output phase of the
	Conditions of use of the camera				camera
			camera
				Matching: l, Not matching: ⋅
Recording format	Video/reference signal supplied	Generator lock	[GL PHASE]	SDI output (HD)	Video output and	Time code
	externally	input			SDI output (SD)	output
	SDI output (1080i)	1080i	[HD SDI]	l	90H delay	l
1080i	Video output		[COMPOSITE]	90H advance	l	l
	SDI output (1080i)	SD (480i)	[HD SDI]	l	90H delay	l
	Video output		[COMPOSITE]	90H advance	l	l
	SDI output (720P)	720P	[HD SDI]	l	120H delay	⋅
720P	Video output		[COMPOSITE]	120H advance	l	⋅
	SDI output (720P)	SD (480i)	[HD SDI]	l	120H delay	l
	Video output		[COMPOSITE]	120H advance	l	l
480i	SDI output (480i)	SD (480i)	Disabled	None	l	l
	Video output

Counter setting and display

When the counter display is set by using the <COUNTER> button, the counter value is displayed on the time code display area of the viewfinder screen. The counter value is indicated in hours:minutes:seconds. The value is not displayed during playback.

Two types of counts are available at the [REC COUNTER] item on the setting menu [DISPLAY SETUP] screen.

Item name	Description
[TOTAL]	The count is totaled and continued until it is reset by button operation.
	The counter value is held even if a P2 card is inserted or the power is turned off.
[CLIP]	The counter value is cleared and the counter is started from 0 (zero) each time recording is started.
	This allows shooting while constantly verifying the recording time of the clip currently being recorded.

@@NOTE

ttPressing the <RESET> button while the counter value is displayed resets the counter value and restarts the counter from 0 (zero). ttThe counter value range is 0:00:00 to 9:59:59 and the count is incremented in 1-second units.

– 71 –