Chapter 4 Adjustments and Settings for Recording — Viewfinder status display

21Zoom position display

Displays the zoom position with [Z00] (maximum wide-angle) - [Z99] (maximum zoom).

ffWhen connecting the lens that supports auto focus, the unit can be switched to [mm/m] at the [ZOOM/FOCUS] item on the setting menu [DISPLAY SETUP] screen.

ffThe focus position display does not move linearly. [NUMBER] is displayed as the factory setting.

22Focus control information

Displays the focus control information with [99] to [00]. [AF] is displayed when auto focus is set with the auto-focus compatible lens connected, and [MF] is displayed when manual focus is set. When auto-focus incompatible lens is connected, the focus control information is not displayed.

When connecting the lens that supports auto focus, the unit can be changed at the [ZOOM/FOCUS] item on the setting menu [DISPLAY SETUP] screen.

23ND filter displayffThe currently selected ND filter is displayed.

ffWhen ND-- is displayed, the <ND FILTER> dial is out of position (i.e. not within <1> to <4>), so check the position of the <ND FILTER> dial.

24Gain displayDisplays the gain value of the image amplifier configured.25<WHITE BAL> switch position display

Displays the currently selected position. Also, white balance operation is displayed when the automatic white balance is preset. In auto tracking white balance function mode, [ATW] is displayed, and when the auto tracking white balance function is locked, [LOCK] is displayed.

If the preset is set to [VAR], the set color temperature such as [V3.2K] is displayed.

26Flash band compensation (FBC) function displayDisplayed when the flash band compensation function is activated.27Digital zoom factor displayDisplays digital zoom factor.
[DZx2]

2 times

[DZx4]

4 times

28Scene file name displayThe [SCENE FILE] (F1 to F6) scene file name is displayed.29Chromatic aberration compensation function (CAC)

Displayed when the chromatic aberration compensation function is active. (Only when the mode check is performed)

30Battery charge level display

This changes [5] → [4] → [3] → [2] → [1] as the battery charge level gets lower. When there is no more battery charge left, [2] ([1]) flashes.

(When the AC adaptor is used, other than [5] may be displayed, but this is not a problem.)

rr Batteries that support the battery charge level % (percentage) displayThe battery charge level is displayed as follows:
[B**%]

10% - 99%

 

Displays the battery charge level as %.

[MAX]

Displays in a fully charged state.

[EMP]

Displays when the charge level is less than 10%.

rr Batteries that do not support the battery charge level % (percentage) display The battery voltage is displayed.

 

[13.5V]

Displays the current voltage value.

31 One-clip recording mode status display

 

 

 

 

[1‑CLIP]

A new clip is about to be recorded by one-clip recording.

 

[1"CLIP]

A new clip can be combined with the previous clip and recorded by one-clip recording.

32Media free space display

ffWhen the [P2CARD REMAIN] item on the setting menu [DISPLAY SETUP] screen is set to [ONE‑CARD], the slot number is displayed to the left of the remaining space of the current P2 card for recording. When [TOTAL] is set, the total remaining space of the two cards is displayed.

ffThe [ONE‑CARD] and [TOTAL] display is swapped in the mode check.

ffNothing is displayed while free space is being calculated and in the USB device mode. [LOOP] is displayed during loop recording. ffIn the mode check during loop recording, the standard recording time that is possible by loop recording is displayed.

ffFree space is displayed in 1-minute units in the range 0 to 999 minutes. 999 minutes is displayed for remaining space exceeding 999 minutes. ffThe display flashes when the remaining space falls to two minutes or below.

33Media information displayDisplays the card slot in which the P2 card is inserted and basic information.

[

] illuminated

Recordable P2 card

 

[ ] illuminated green

P2 card for recording target

[

] flashing

The card is being recognized.

 

 

[

]

No card inserted

 

 

 

[

]

The card is write-protected.

 

 

– 76 –