Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P down, [OFF], 4[SIZE], 5[USED], Features, 3[MODEL], 8[MODEL], 12[NAME], For [FAT], Hard disk, 2[VENDOR], drive type, 10[SERIAL], 11[VERIFY], [ON/FAILED]

Chapter 9 Connecting to External Devices — Connection through the <USB2.0> terminal

10

11

12

Press the <EXIT> button to return to the previous screen.For [FAT]

1

2

3

4

5

6

Press the <SET> button to switch the screen.

Press the <EXIT> button to return to the previous screen.

1[PARTITION]

The hard disk drive type is displayed. The available functions differ depending on the hard disk drive type.

Hard disk	Features	Available functions
drive type
	A special format to enable
	fast write/write-back on a	Thumbnail display, write/
[TYPE S]	card basis.	write back on a card
	Perform [FORMAT] on	basis, write-back on a
	the camera to obtain this	clip basis, format
	format.
	Indicates P2 STORE.	Thumbnail display, write
[P2STORE]	No writing operation is	back on a card basis,
	allowed.	write back on a clip basis
	A hard disk drive that the	Thumbnail display, write
	heading basic partition	back on a clip basis,
[FAT]	is FAT16 or FAT32 in a	format
	computer and that requires	ffAfter formatting, it can
	the CONTENTS directory in	be used as the [TYPE
	the partition root.	S] hard disk drive.
	Hard disk drive other than
	the above.
	ffDisplayed when the	format
[OTHER]	root does not have the	ffAfter formatting, it can
	CONTENTS directory, or	be used as the [TYPE
	when the file system is not	S] hard disk drive.
	FAT16 or FAT32, such as
	NTFS.

2[VENDOR]The vendor name of the hard disk drive is displayed.3[MODEL]The model name of the hard disk drive is displayed.4[SIZE]The total space of the hard disk drive is displayed.5[USED]

The usage capacity of the hard disk drive is displayed at the upper section. (Unit: GB)

The number of P2 cards saved on the hard disk drive is displayed at the bottom section.

6[FREE CAP.]The free space in the hard disk drive (GB) is displayed.7Partition number

The partition number of the hard disk drive is displayed. The partition number is on a single P2 card basis.

@@NOTE

ttUp to ten numbers are displayed in the screen. If there aremore than 11 partitions, use the cursor buttons ({) to scrolldown.ttUp to 23 P2 cards can be recorded to the hard disk drive.8[MODEL]The model name of the P2 card on the recording source is displayed.

@@NOTE

ttPress the cursor buttons (I) to switch to [PARTITION NAME]. Use the cursor buttons (Y) to return to the model name display.

9[DATE]/[TIME]Date and time when the data in the partition is saved.10[SERIAL]The serial number of the P2 card on the recording source is displayed.11[VERIFY]The setting and result of verification are displayed.

[ON/FINISHED] Verification was performed and the verification result matches.

[ON/FAILED]	Verification was performed but the verification result
	does not match.
[OFF]	Verification was not performed.
[----]	No verification information available.

@@NOTE

ttClips after the 1001st clip are not displayed even if the hard disk drive type is FAT.

ttFor the FAT formatted hard disk drives, only the information in the initial partition is displayed.

ttIf there is an invalid partition in P2 STORE (AJ‑PCS060G), the partition information is displayed in gray.

12[NAME][PARTITION NAME] is displayed.

A [PARTITION NAME] can be entered from the software keyboard by selecting [CHANGE PARTITION NAME] in the [OPERATION] menu while the thumbnails are displayed. (Up to 20 characters)

– 148 –