Chapter 6 Thumbnail Operations for Clips — Thumbnail operations

@@NOTE

ttThe camera is not capable of recording or playing back voice memos.4Clip informationDisplays detailed information about the clip.
[CLIP NAME]

Displays clip names.

[START TC]

Displays the time code value at the start of the

 

recording.

[START UB]

Displays the user bit value at the start of the recording.

[DATE]

Displays the date of the recording.

[TIME]

Displays the time at the start of recording.

[DURATION] Displays the time length of the clip.

[V_FORMAT] Displays recording format of the clip.

[FRAME RATE] Displays the frame rate for playback.

[REC RATE] Displays the recording frame rate. (Only displayed when using the variable frame rate recording function to record in native mode.)

5Clip metadata

Displays more detailed data about the clip. Move the pointer using the cursor buttons, and press the <SET> button to check the detailed content.

For details, refer to “Setting clip metadata” (page 110).
Modifying recorded clip metadata

1Display the metadata details window for the clip to be modified on the clip properties screen.

2 Place the cursor on the item to be modified using the cursor buttons.

The metadata that can be modified is shown like [CREATOR] in the following figure.

3Press the <SET> button.

Information about keyboard operation is the same as “Checking and modifying uploaded metadata” (page 111).

ffThe input window (soft keyboard) for modifying metadata is displayed.ffInput characters from the keyboard to modify the metadata.
4 Press the [OK] button on the keyboard.

The modified metadata is written on the clip and the screen returns to the metadata details window.

@@NOTE

ttTo delete each item in [LOCATION] (shooting location data) of [SHOOT], the item cannot be deleted alone. By setting the [ALTITUDE] item to empty, other [LONGITUDE] and [LATITUDE] items are collectively deleted.

ttThe metadata for a clip with the [] incomplete clip indicator cannot be modified. For the clips recorded on multiple P2 cards, modify the metadata while all P2 cards are inserted.

ttAny [MEMO] with 101 characters or more cannot be modified.
P2 card status displayrr P2 card status display settings

For the P2 card status displayed by selecting [PROPERTY] → [CARD STATUS] from the thumbnail menu, you can select whether to display the status with P2 card remaining capacity or used memory capacity.

1Press the <THUMBNAIL> button.

The thumbnail screen appears on the viewfinder screen.

2 Select [PROPERTY] → [PROPERTY SETUP] → [P2 CARDCAP] from the thumbnail menu.

When the following screen appears, select the P2 card status display setting from the [P2 CARD CAP] item.

[REMAIN]

Displays remaining capacity on the P2 card as the

 

P2 card status display. (Factory setting)

[USED]

Displays used memory capacity on the P2 card as

 

the P2 card status display.

– 115 –