Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P Message, Measure, Message, Measure, Description, Description, rr Soft keyboard, rr Hard disk drive (USB host mode)

Chapter 10 Maintenance and Inspection — Warning system

rr Soft keyboard

Message	Description	Measure
CANNOT CHANGE!	An attempt is made to enter a [PERSON] (user who enters	Enter the [TEXT] (text information) first.
	the memo) when a text memo is not available.
CANNOT SET!	The entered value is invalid.	Change the input value.
INVALID VALUE!

rr Hard disk drive (USB host mode)

Message	Description	Measure
CANNOT ACCESS CARD!	An error occurred while accessing the P2 card.	Check the P2 card.
CANNOT ACCESS TARGET!	An error occurred while accessing the connection target.	Check the hard disk drive status or the connection.
CANNOT FORMAT!	The hard disk drive cannot be initialized.	Change the connected hard disk drive.
CANNOT RECOGNIZE HDD!	The destination target cannot be properly recognized.	Reboot the hard disk drive or connect another hard disk drive.
CARD IS EMPTY! CANNOT	The P2 card to copy is empty.	The copy operation is not performed because the card is
COPY!		empty.
	A warning indicates that the copy operation cannot be	The copy operation cannot be performed because the target
FORMAT P2 CARD!	performed at the hard disk drive → P2 import because the P2	P2 card is not empty. Format the card using a P2 device and
	card is already recorded.	try again.
LACK OF CAPACITY!	Not enough space left on the hard disk drive.	There is not enough space on the connected target, so use a
		new hard disk drive or formatted hard disk drive.
HDD DISCONNECTED!	The hard disk drive is disconnected.	Reconnect the USB connection cable. If the hard disk drive
		does not operate properly, turn it off and turn it back on again.
	The copy operation cannot be performed because the P2 card
MISMATCH COMPONENT!	capacities and models do not match between the source and	Use the P2 cards of the same model, or import on a clip basis.
	the target.
TOO MANY PARTITIONS!	There are too many partitions.	The maximum number of partitions is 23, so use a new hard
		disk drive or formatted hard disk drive.
TOO MANY TARGETS!	Multiple devices are connected.	Disconnect the devices, turn off the camera, and then turn it
		back on again.
UNKNOWN DEVICE	A non-compatible DVD drive or other device is connected.	Disconnect the devices, turn off the camera, and then turn it
CONNECTED!		back on again.
VERIFICATION FAILED!	The compare check performed after copying failed.	Copy the data again.

– 159 –