Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P Error displays about proxy data recordings, Checking detailed information of the proxy data, RATE], [FORMAT], [TC SUPER], [VIDEO CODEC], [AUDIO CODEC]

Chapter 11 Additional Functions from the Optional Board — Video encoder board (AG‑YDX600G)

-[EXCH. THUMBNAIL]-Adding and deleting [TEXT MEMO] and [SHOT MARK] Playback is supported.

On these devices, individual clips with proxy data combined from multiple clips are displayed as an incomplete clip []. (Except in [STD 2CH MP4] mode)

Checking detailed information of the proxy data

The operation method or the panels may differ based on the models and versions of the camera.

1Press the <THUMBNAIL> button.

The thumbnail screen appears on the viewfinder screen.

2 Press the <THUMBNAIL MENU> button and select [PROPERTY] → [CLIP PROPERTY] from the thumbnail menu.

A screen like the one below is displayed. Use the cursor buttons to move the cursor to the [PROXY] item.

3Press the <SET> button.

Detailed information about the proxy data is displayed as below.Error displays about proxy data recordings

[FORMAT]	The file format of the recorded data is
	displayed.
[VIDEO CODEC]	Video codec information of the recorded data
	is displayed.
[VIDEO FRAME RATE]	Video frame rate information of the recorded
	data is displayed.
[VIDEO BIT RATE]	Video bit rate information of the recorded
	data is displayed.
[VIDEO RESOLUTION]	The video resolution of the recorded data is
	displayed.
[ASPECT RATIO]	The aspect ratio of the recorded data is
	displayed.
[TC SUPER]	An indication whether the TC (time code)
	display is superimposed over the recorded
	video.
[AUDIO CODEC]	Audio codec information of the recorded data
	is displayed.
[AUDIO BIT RATE]	Audio bit rate information of the recorded
	data is displayed.
[AUDIO SAMPLING	Audio sampling rate information of the
RATE]	recorded data is displayed.
[NUM.OF AUDIO CH]	The number of audio channels of the
	recorded data is displayed.

If an error occurs during recording the proxy data, check the entries in the following table and take necessary actions.

Error displays	Behavior and cause	Action to take
(viewfinder screen)
[PROXY BOARD ERROR] or	Proxy data recording will stop, but recording of the original	The proxy data will not be properly recorded. Turn the camera
[PROXY REC WARNING]	material will continue.	off and turn it back on again to check the recording and
	ffError in the board	playback.
	[PROXY BOARD ERROR]
	ffProxy data recording error
	[PROXY REC WARNING]
	ffIf a proxy data recording error occurs, the proxy data currently
	being recorded will be processed as below:
	- The proxy data being recorded to the P2 card will be
	deleted.
	- The proxy data being recorded to the SD memory card will
	not be restored.
[NEAR END (SD)]	Recording of the original materials and proxy data will continue.	After finishing recording, insert a new SD memory card.
	ffThe remaining SD memory card capacity is getting low
	(approximately shorter than one minute).
[EOM (SD)]	Proxy data recording to the SD memory card will stop, but	After finishing recording, insert a new SD memory card.
	recording to the P2 card will continue.	ffThe proxy data being recorded to the SD memory card will
	ffThe remaining SD memory card capacity ran out.	be deleted.
		To restore the deleted proxy data, select clips in the P2 card
		and copy them to the SD memory card. (page 166)

– 165 –