Chapter 4 Adjustments and Settings for Recording — Assigning functions to <USER> buttons

Assigning functions to <USER> buttons

Selected functions can be assigned to the <USER MAIN>, <USER1>, and <USER2> buttons.

Set the functions to be assigned at the [USER MAIN], [USER1], and [USER2] items on the setting menu [SW MODE] screen. Each item is set from the setting menu [SW MODE] screen.

SW MODE

LOW GAIN

0dB

MID GAIN

6dB

HIGH GAIN

12dB

ATW

OFF

W.BAL.PRESET

3.2K

USER MAIN

 

Y_GET

USER1

 

BACKLIGHT

USER2

TEXT MEMO

 

 

 

 

 

 

PUSH MENU TO RETURN

 

 

 

 

Selectable functions

 

 

 

Item name

 

Description

[SPOT LIGHT]Assigns on/off of auto iris control for spotlight.
[BACK LIGHT]Assigns on/off of auto iris control for the backlight compensation.
[ATW]Switches the auto tracking white balance function on/off.
[ATW LOCK]

Fixes the white balance value when pressing this item while the auto tracking white balance function is activated. Resumes the auto

 

tracking white balance function when pressing again.
[GAIN:18dB]Assigns the function for increasing gain to 18 dB.
[D.ZOOMX2]Assigns the digital zoom function.
[D.ZOOMX4]Zooms in on the field angle by 2x/4x vertically and horizontally.
[FBC]Switches the flash band compensation function on/off.
[Y GET]

Assigns the function for displaying the brightness level of the frame area displayed near the center.

[WFM]

Assigns the function for switching the waveform display. Select the waveform display at the [WFM] item (page 126) on the setting menu

 

[SW MODE] screen.
[PRE REC]Assigns the function for switching the pre-recording function on/off.
[REC REVIEW]Assigns the rec review function.
[TEXT MEMO]Assigns text memo recording.
[SHOT MARK]Assigns the shot mark recording function.
[SLOT SEL]Assigns P2 card slot selection.
[A.MONI SEL]

Switches CH1 monaural, CH1/CH2 stereo, and CH2 monaural when the audio monitor channel is CH1/CH2. Switches CH3 monaural,

 

CH3/CH4 stereo, and CH4 monaural when the audio monitor channel is CH3/CH4.
[PC MODE]

Assigns the function for switching USB device mode or USB host mode on/off. Select the USB device mode or USB host mode at the [PC

 

MODE SEL] item on the setting menu [PC/USB/LAN] screen.
[INHIBIT]Disables assignment of functions.

@@NOTE

ttFactory assignment settings are as follows:
<USER MAIN>[Y GET]
<USER1>[BACK LIGHT]
<USER2>[TEXT MEMO]

– 60 –