Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P Error code, Card warning code, Warning/error displays in the thumbnail operation and the USB host mode, Code No, Code No, Message, Recording, Description

Chapter 10 Maintenance and Inspection — Warning system

ffPress the playback related buttons. ffPress the <THUMBNAIL> button. ffEject all the cards.

*5 The warning can be stopped by setting the [NEAR END CANCEL] item to [ON] and pushing the <DISP/MODE CHK> switch towards the <CHK> side.

Error code

Indicates the error code on the [HOME] screen of SmartUI when something has caused an error on the camera. Check the types of warning, and deal with the error according to “Warnings description list” (page 157).

Code No.	Description		Type of warnings
E-27	Recording control error (viewfinder screen [P2 CONTROL ERROR])	1.	System error
E-30	P2 card removal error (viewfinder screen [TURN POWER OFF])	2.	Card removal error
E-38	P2 streaming microcontroller error (viewfinder screen [P2 MICON	1.	System error
	ERROR])
E-3F	Camera unit error (viewfinder screen [CAM MICON ERROR])	1.	System error
	Error in image sequence, generator lock input signal, or SDI input
E-40	signal (viewfinder screen [IRREGULAR FRM SIG], [PULL DOWN	5.	Recording error, 6. Reference signal error
	ERROR])
00000011	Recording error to P2 cards, etc. (viewfinder screen [REC RAM	5.	Recording error
	OVERFLOW], [CARD ERROR*], [OVER MAX# CLIPS], [ERROR])
Card warning code

Code No.	Description		Recording		Indication on SmartUI
	The directory structure on the P2 card is	Operation continues, but immediately back
E-70	not supported. ([DIR ENTRY NG CARD]
		up data on the card, and format the card
	(slot number) is displayed on the viewfinder
	screen.)	before using it again.			The warning code is displayed on
	The maximum number of overwrites on the	Operation continues, but recording			the [HOME] screen of SmartUI.
E-71	P2 card has been exceeded. ([RUN DOWN	or playback may not be performed
	CARD] (slot number) is displayed on the	properly. Replacement of the P2 card is
	viewfinder screen.)	recommended.
Warning/error displays in the thumbnail operation and the USB host mode
rr Thumbnail
Message	Description			Action to take
CANNOT ACCESS!	Data cannot be accessed due to a content defect or some			Ensure the health of the media and the clips.
	other reason.
CANNOT CHANGE!	For a clip with the [ ] mark, where a thumbnail cannot be			Set the [SYSTEM MODE] item on the setting menu [SYSTEM
	generated with AVC‑Intra 100 or AVC‑Intra 50, the thumbnail
				SETUP] screen according to the clips.
	cannot be modified in the text memo position.
CANNOT COPY!	Images cannot be copied.			Check the copy conditions.
CANNOT DELETE!	Images cannot be deleted due to contents version mismatch.			Match the device and contents version.
CANNOT FORMAT!	A P2 card problem or some other reason prevents formatting.			Check the P2 card.
	Clips cannot be remerged because either clips that are not
CANNOT RE-CONNECT!	recorded across multiple P2 cards are selected or other			Check the selected content.
	reasons.
CANNOT REPAIR!	Clips cannot be restored because contents that cannot be			Check the selected content.
	restored are selected or other reasons.
LACK OF CAPACITY!	There is not enough recording capacity left on the card.			Insert a card with sufficient recording capacity.
	When all necessary P2 cards are not inserted, an attempt is			Insert all P2 cards with the recorded clips and ensure that the
MISSING CLIP!	made to add a shot mark to the clips recorded across multiple			[ ] incomplete clip indicator disappears, and then add the
	P2 cards.			shot mark.
NO CARD!	No P2 or SD card is inserted.			Insert the relevant medium.
NO COPY TO SAME CARD!	A clip cannot be copied to the card storing the original clip.			Copy the selected clip to a card that does not contain the
				original clip.
NO FILE!	The specified file does not exist.			Check the file.
SAME CLIP IS SELECTED!	Clips cannot be copied because the clips already copied and			Check the selected clips, and remove either the original clips
	the original clips are selected.			or copied clips, and then perform the copy operation.
TOO MANY CLIPS!	Too many clips are selected.			Reduce the number of selected clips.
UNKNOWN CONTENTS	Contents version is mismatched.			Match the device and content versions.
FORMAT!
UNKNOWN DATA!	The metadata character code is invalid.			The metadata character code is UTF-8. Enter valid characters
				using a viewer.
	Characters in the clip name had to be deleted when adding a			For the counter addition setting, the user clip name plus the
USER CLIP NAME MODIFIED!				counter value can only contain up to 100 bytes. Characters in
	counter value.			the clip name are automatically deleted when the total number
				of characters exceeds this limit.
WRITE PROTECTED!	The P2 or SD card is write-protected.			Insert write-enabled media.

– 158 –