Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P [LENS SETUP] screen, [CARD FUNCTIONS] screen, CAC, Item, [ON], Item, Item, [ON], [OFF], [OFF], Remark, Remark, [READ], [TITLE, [READ], [TITLE, Remark, camera

Chapter 7 Menu Operations — Menu list

Item	Description of settings	Remark
NEAR END CANCEL	Sets the cancelation of battery near end warning.
	[ON], [OFF]
	ffWhen this item is set to [ON], flashing of the warning lamp and tally lamp can be
	stopped by pushing the <DISP/MODE CHK> switch towards the <CHK> side.
		indicates factory setting values.

[CARD FUNCTIONS] screen

ffOperations on setting data files may result in error during playback or when the [PC MODE] item on the setting menu [PC/USB/LAN] screen is set to [ON]. Set the [PC MODE] item to [OFF] before performing operations.

Item		Description of settings		Remark
SCENE FILE	Reads and writes scene files from or in an SD memory card.		ffThis setting is not available when clip connection
	[FILE SELECT]	Selects a scene file (1 to 4).	is underway with one-clip recording.
	[READ]	Selects and reads the setting value of a scene file (1 to 4)
		saved in the SD memory card.
	[WRITE]	Saves the setting value of the current scene file (1 to 4) in the
		SD memory card.
	[TITLE	Updates the title list.
	RELOAD]
USER FILE	Reads and writes user files (all setting items other than scene files) from or in an		ffThis setting is not available when clip connection
	SD memory card.		is underway with one-clip recording.
	[FILE SELECT]	Selects a user file (1 to 4).
	[READ]	Selects and reads the setting value of a user file (1 to 4) saved
		in the SD memory card.
	[WRITE]	Saves the setting value of the current user file (1 to 4) in the SD
		memory card.
	[TITLE	Updates the title list.
	RELOAD]
SD CARD FORMAT	Formats an SD memory card.		ffThis setting is not available when clip connection
			is underway with one-clip recording.
[LENS SETUP] screen
Item		Description of settings		Remark
SHADING SELECT	Sets the parameter for shading compensation.
	[USER1]	User setting 1
	[USER2]	User setting 2
	[USER3]	User setting 3
	[OFF]	Shading compensation off
SHADING (USER)	Sets the shading parameter for [USER1], [USER2], and [USER3] of [SHADING		ffThis setting is not available when the [SHADING
	SELECT].		SELECT] item is [OFF].
CAC	Sets whether to activate the lens chromatic aberration correction (CAC) function.
	[ON]	Activates when the chromatic aberration correction function
		activation is possible.
	[OFF]	Does not activate the chromatic aberration correction function.
CAC PROPERTY	Displays the chromatic aberration correction file number currently in use, and
	the information of the chromatic aberration correction files already read on the
	camera.
CAC CARD READ	Reads the chromatic aberration correction file from the SD memory card.		ffThis setting is not available when clip connection
			is underway with one-clip recording.
CAC FILE DELETE	Displays the list of chromatic aberration correction files read on the camera, and
	deletes the selected files among them.
CAC FILE INIT	Initializes the chromatic aberration correction files read on the camera to the
	chromatic aberration correction files of the factory setting.
IRIS GAIN	Sets whether the iris correction control is performed on the camera or the lens.		ffSince the FUJINON lens with the extender (such
			as x2, x0.8) which was sold prior to the DIGI
			POWER type lens activates the iris correction
	[CAMERA]	Performs the iris correction control on the camera.	control on the lens with the extender installed, the
			iris control on the camera is not activated properly
			when this item is set to [CAMERA].
	[LENS]	Performs the iris correction control on the lens.	ffWhen an auto-focus compatible lens is not
			attached, the selected item is displayed in blue
			and cannot be set.
IRIS GAIN VALUE	Sets the adjustment value for the [IRIS GAIN] item. This setting is enabled when		ffWhen an auto-focus compatible lens is not
	the [IRIS GAIN] item is set to [CAMERA].		attached, the selected item is displayed in blue
	[1], [2], [3]		and cannot be set.
IRIS ADJUST	Force sets iris.
	[F2.8], [F16]
				indicates factory setting values.

– 131 –