Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P [OTHER FUNCTIONS] screen, Item, [ON], Item, [ON], [OFF], [RED], Remark, Remark, [CHAR], [CLIP], [GREEN], [HD SDI], [CLIP&T], [ON], [OFF], [COMPOSITE]

Chapter 7 Menu Operations — Menu list

Item		Description of settings		Remark
P2 BROWSE (OP3)	Sets the P2 browsing function.		ffIf [PC MODE] is set to [ON] when OP3 is installed,
	[ON]	Activates theP2 browsing function.	the selected item is displayed in blue and cannot
			be set.
	[ON (+CTRL)]	Activates the P2 browsing function, and accepts recording
		control of the camera as well as settings of time code and user
		bits from the connected device.
	[OFF]	Deactivates theP2 browsing function.
				indicates factory setting values.
[OTHER FUNCTIONS] screen
Item		Description of settings		Remark
USER FILE	Saves, reads, or initializes user files in the built-in memory of the camera.		ffThis setting is not available in the following cases:
	(page 84)		- The USB device mode is set.
	[LOAD], [SAVE], [INITIAL]		- Clip connection is underway with one-clip
	ffThis setting does not affect the items set on the [SCENE FILE] screen.		recording.
			ffUser file includes the setting value of SmartUI.
ACCESS LED	Sets whether to light the access LED of the P2 card.
	[ON], [OFF]
REC TALLY	Sets the tally lamp display on the viewfinder.		ffWhen the [HD SDI REMOTE] item is set to [ON]
	[RED]	Illuminates the red tally lamp on the viewfinder during recording	and the recording operation control signal is
			output superimposing to the HD SDI signal, the
		with the camera. The front tally lamp and the back and rear tally
			front tally lamp on the viewfinder and the back
		lamps on the body are illuminated.
			and rear tally lamps on the body are illuminated,
	[GREEN]	Illuminates the green tally lamp on the viewfinder during
			regardless of the setting of this item or recording
		recording with the camera. The front tally lamp or the tally
			status of the camera.
		lamps on the body are not illuminated
	[CHAR]	During recording with the camera, the tally lamp on the
		viewfinder is not illuminated and the recording status is
		displayed only with text on the screen. The front tally lamp or
		the tally lamps on the body are not illuminated.
	ffThe screen display for recording always appears regardless of the above
	settings.
CLOCK SETTING	Sets the built-in calendar (date and time).
	For details, refer to “Setting the date/time of the internal clock” (page 31).
TIME ZONE	Sets the time lag against the Greenwich Mean Time (GMT).		ffThis setting is not initialized when initialization is
	[−12:00] ... [0:00] ... [+13:00]		performed with the [INITIAL] item of [MENU INIT]
	For details, refer to “Setting the date/time of the internal clock” (page 31).		and [USER FILE].
GL PHASE	Selects the output signal of which phase is to be locked to the signal input to the		ffThis setting is not available when the [SYSTEM
	<GENLOCK IN> terminal when in the HD (1080i, 720P) mode. (page 71)		MODE] item is set to [480‑59.94i], [576‑50i], and
	[HD SDI]	Locks the phase of HD SDI output signals.	[1080‑23.98PsF].
	[COMPOSITE]	Locks the phase of the down-converted composite signal.
H PHASE	Adjusts the horizontal phase when locking the phase to the signal to the signal		ffPress and turn up or down the jog dial button,
	input to the <GENLOCK IN> terminal.		and keep pressing it at the position to change the
	[−512] ... [0] ... [+511]		value faster.
SEEK SELECT	Selects the position to be cued when the <FF/)> or <%/REW> button is
	pressed while playback is paused.
	[CLIP]	Top of the clip
	[CLIP&T]	Top of the clip and text memo location
MENU INIT	Initializes all the setting menus including all scene files F1 to F6 and user files		ffThis setting is not available in the following cases:
	(including settings of SmartUI) to the factory settings.		- The USB device mode is set.
			- Clip connection is underway with one-clip
			recording.
				indicates factory setting values.

– 133 –