Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P SD memory card status display, Contents of P2 card status display settings, [USED], [BLANK], [TOTAL], [NO CARD], [NO CARD], [PROTECT], [PROXY REM]

Chapter 6 Thumbnail Operations for Clips — Thumbnail operations

Contents of P2 card status display settings

Select [PROPERTY] → [CARD STATUS] from the thumbnail menu. The following screen appears.

rr When [REMAIN] is selected

1 2

3

5

4

1 Write-protect markThe [] mark appears if the P2 card is write-protected.2P2 card status (remaining capacity)

The remaining memory capacity of the P2 card is shown as a bar graph and percentage. The bar graph indicator moves to the left as the remaining capacity decreases.

The following displays may appear, depending on the card status.

[FORMAT ERROR!]	An unformatted P2 card is inserted.
[NOT SUPPORTED!]	An unsupported card is inserted in the
	camera.
[NO CARD]	No P2 card is inserted.

rr When [USED] is selected

1 2

3

5

4

1 Write-protect mark

The [] mark appears if the P2 card is write-protected.

2P2 card status (used memory capacity)

The used memory capacity of the P2 card is shown as a bar graph and percentage. The bar graph indicator moves to the right as the used memory capacity increases.

The following displays may appear, depending on the card status.

[FORMAT ERROR!]	An unformatted P2 card is inserted.
[NOT SUPPORTED!]	An unsupported card is inserted on the
	camera.
[NO CARD]	No P2 card is inserted.

Use the cursor buttons to place the cursor on the P2 card for data to be accessed and press the <SET> button to display detailed information about the P2 card to check specific information such as the serial number and the user ID.

3P2 card remaining capacity/total capacity

Displays the P2 card remaining capacity and total capacity. The units are minutes. Because only the figures in minutes are displayed, the total remaining memory capacity for each P2 card may not match the total remaining memory capacity.

4Total remaining capacity for the slotDisplays the total remaining capacity for all two slots.

However, the remaining capacity of a write-protected P2 card is not included in the total available space.

5 Warning markWhen the following P2 cards are detected, the [] mark is displayed.

[RUN DOWN CARD] The maximum number of overwrites on the P2 card has been exceeded.

[DIR ENTRY NG CARD] The directory structure on the P2 card is not supported.

The warning can be confirmed on the P2 card detailed information display in “P2 card status (remaining capacity)” (page 116).

Use the cursor buttons to place the cursor on the P2 card for data to be accessed and press the <SET> button to display detailed information about the P2 card to check specific information such as the serial number and the user ID.

3P2 card used memory capacity/total capacity

Displays the P2 card used memory capacity and total capacity. The units are minutes. Because only the figures in minutes are displayed, the total used memory capacity for each P2 card may not match the total memory capacity.

The used memory capacity of a write-protected P2 card is displayed as 100%.4Total used memory capacity for all slotsDisplays the total used memory capacity for all two slots.

5 Warning mark

When the following P2 cards are detected, the [] mark is displayed.

[RUN DOWN CARD] The maximum number of overwrites on the P2 card has been exceeded.

[DIR ENTRY NG CARD] The directory structure on the P2 card is not supported.

The warning can be confirmed on the P2 card detailed information display in “P2 card status (used memory capacity)” (page 116).

SD memory card status display

The status display enables confirmation of the SD memory card format condition, available memory space, etc.

Select [PROPERTY] → [DEVICES] → [SD CARD] from the thumbnail menu.

[SD STANDARD]	Indicates whether an SD memory card is formatted according to the SD/SDHC standard.
	ff[SUPPORTED]: Complies with SD/SDHC
	ff[NOT SUPPORTED]: Does not comply with SD/SDHC
[USED]	Used capacity (bytes)
[BLANK]	Available space (bytes)
[TOTAL]	Total capacity (bytes)
[PROXY REM]	Remaining capacity in proxy recording (displayed only when the video encoder board is installed)
[NUMBER OF CLIP]	The number of clips on an SD memory card when clips have been copied to an SD memory card
[PROTECT]	Write protected

– 116 –