Panasonic AG-HPX600EJ, AG-HPX600EN, AG-HPX600P [SW MODE] screen, Item, [0%], Item, [6dB], [Bch], [OFF], Remark, Remark, [12dB], [7.5%A], [SQUEEZE], [ON], [OFF], [SIDE CROP], [50i], [25P], [LETTER BOX]

Chapter 7 Menu Operations — Menu list

Item		Description of settings		Remark
CAMERA MODE	Sets the camera shooting mode when set to [1080‑59.94i], [480‑59.94i],		ffDisplayed only when the [SYSTEM MODE] item
	[1080‑50i], and [576‑50i].		is set to [1080‑59.94i], [1080‑50i], [480‑59.94i], or
			[576‑50i].
			ffThis setting is not available in the following cases:
	rr When [SYSTEM MODE] is [1080‑59.94i] or [480‑59.94i]		- The [REC SIGNAL] item is set to [SDI IN].
	[60i], [30P], [24P], [24PA]		- The [SYSTEM MODE] item is set to
			[1080‑59.94i], and the [REC FORMAT] item is
			set to other than [DVCPROHD/60i].
			- [SYSTEM MODE] is set to [1080‑50i], and
	rr When [SYSTEM MODE] is [1080‑50i] or [576‑50i]
			the [REC FORMAT] item is set to other than
	[50i], [25P]		[DVCPROHD/50i].
			- Clip connection is underway with one-clip
			recording.
SCAN REVERSE	Compensates image inversion that occurs when a lens for filming or anamorphic
	lens is mounted.
	[ON], [OFF]
ASPECT CONV	Selects aspect ratio for images recorded with 480i or 576i.		ffThis setting is not available when the [SYSTEM
	[SIDE CROP]	Side-crop mode (Crops the left and right edges.)	MODE] item is [1080‑59.94i], [1080‑23.98PsF],
			[1080‑50i], [720‑59.94P], or [720‑50P].
	[LETTER BOX]	Letterbox mode (Adds black bands at the top and bottom of the
			ffThis setting is not available when clip connection
		image.)	is underway with one-clip recording.
	[SQUEEZE]	Squeeze mode (Squeezes images horizontally.)
SETUP	Sets the setup level of video signals for 480i.		ffThis item is not displayed when the [SYSTEM
	[0%]	Composite output and recording setup levels will both be set	MODE] item is set to [1080‑50i], [720‑50P], or
			[576‑50i].
		to 0%.
	[7.5%A]	Composite output setup level will be set to 7.5%, while
		recording setup level will be set to 0%.
				indicates factory setting values.
[SW MODE] screen
Item		Description of settings		Remark
LOW GAIN	Sets the gain value assigned to the L position of the <GAIN> switch.
	[−3dB], [0dB], [3dB], [6dB], [9dB], [12dB]
MID GAIN	Sets the gain value assigned to the M position of the <GAIN> switch.
	[−3dB], [0dB], [3dB], [6dB], [9dB], [12dB]
HIGH GAIN	Sets the gain value assigned to the H position of the <GAIN> switch.
	[−3dB], [0dB], [3dB], [6dB], [9dB], [12dB]
ATW	Assigns the auto tracking white balance function to the <WHITE BAL> switch.		ffWhen the <WHITE BAL> switch is set to the
	(page 54)		<B> position and this menu is set to [Bch],
	[Bch]	Activates the auto tracking white balance function when the	pressing the <USER> buttons (<USER
			MAIN>/<USER1>/<USER2>) to which the auto
		<WHITE BAL> switch is set to the <B> position.
			tracking white balance function is assigned
	[OFF]	Does not assign the auto tracking white balance function to the	does not turn off the auto tracking white balance
		<WHITE BAL> switch.	function.
W.BAL.PRESET	Sets the color temperature assigned to the <PRST> position of the <WHITE BAL>		ffThe color temperature when [VAR] is selected is
	switch.		set at the [CAM03:SETUP] screen of SmartUI.
	Each time the <AUTO W/B BAL> switch is pushed towards the <AWB> side,
	color temperature can be switched to 3200 K, 5600 K, and user-specified variable
	value.
	[3.2K], [5.6K], [VAR]
USER MAIN	Sets the function assigned to the <USER MAIN> button. (page 60)		ff[SPOT LIGHT] and [BACK LIGHT] functions
	[SPOT LIGHT], [BACK LIGHT], [ATW], [ATW LOCK], [GAIN:18dB],		do not work when the remote control unit
	[D.ZOOMX2], [D.ZOOMX4], [FBC], [Y GET], [WFM], [PRE REC], [REC		(AJ‑RC10G) or the extension control unit
	REVIEW], [TEXT MEMO], [SHOT MARK], [SLOT SEL], [A.MONI SEL], [PC		(AG‑EC4G) is connected.
	MODE], [INHIBIT]		ffWhen the dynamic range stretcher function is
USER1	Sets the function assigned to the <USER1> button.		activated, the digital zoom function is disabled.
	The setting contents are the same as [USER MAIN].
	[BACK LIGHT] (page 60)
USER2	Sets the function assigned to the <USER2> button.
	The setting contents are the same as [USER MAIN].
	[TEXT MEMO] (page 60)
RET SW	Sets the function assigned to the <RET> button of lens.		ffWhen an auto-focus compatible lens is not
	[PUSH AF], [D.ZOOMX2], [D.ZOOMX4], [REC REVIEW], [TEXT MEMO], [SHOT		attached, the operation is disabled even if [PUSH
	MARK], [INHIBIT]		AF] is selected.
	ffThe function assigned to the <RET> button does not work when [INHIBIT] is
	selected.
				indicates factory setting values.

– 125 –