Panasonic DMC-L10K operating instructions Printing the Pictures, 120

Connecting to other equipment

∫PictBridge (PTP) setting Even if you set [USB MODE] to [PictBridge (PTP)], you can connect to your PC if the OS is “Windows XP”, “Windows Vista” or “Mac OS X”.

• Pictures can only be read on the camera. They cannot be written to a card or deleted.

• When there are 1000 or more pictures on a card, the pictures may not be imported.

•Do not use any other USB connection cables except the supplied one.

•Do not disconnect the USB connection cable while [ACCESS] is displayed.

•If battery power is exhausted while the camera and the PC are communicating, the recorded data may be damaged. Use a battery with sufficient battery power (P18) or the AC adaptor (P128).

•If the remaining battery power becomes low while the camera and the PC are communicating, the status indicator blinks and the alarm beeps. In this case, stop the communication at once on the PC.

•When connecting the camera to a “Windows 2000” OS PC with the USB connection cable, do not replace the card while the camera and the PC are connected. The information on the card may be damaged. Disconnect the USB connection cable before replacing the card.

•Pictures edited or rotated with a PC may be displayed in black in playback mode (P48), multi playback (P52) and calendar playback (P53).

•For information about this, refer to the separate operating instructions for PC connection.

•Read the operating instructions for the PC.

120

Printing the Pictures

By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to print and start printing on the camera’s screen.

Set print settings such as the print quality on the printer beforehand. (Read the printer operating instructions.)

C

A

B

AUSB connection cable (supplied) B DC cable (DMW-DCC1; optional)

• It may take time to print the pictures so use a battery with sufficient battery power (P18) or the AC Adaptor (P128) when you connect to a printer.

• Turn the camera off and then insert or remove the cable for the AC Adaptor (P128).

VQT1G28