Panasonic DMC-L10K operating instructions Contrast, Sharpness, Saturation, Noise RED

Menu Settings

∫Adjusting each film mode to the desired setting

1 Press 3/4 or use the front dial on the screen shown in step 1 on page 92 to select an item.

2 Press 2/1 or use the rear dial to adjust the item and then press [FILM MODE].

or

3 Press 3/4 to select the item and then press [MENU/SET].

MENU /SET

•You can register 2 settings. ([MY FILM1] and [MY FILM2]

(After registering, the film mode name that was registered previously is displayed.)

•[STANDARD] is registered in [MY FILM1]

and [STANDARD] () is registered in [MY FILM2] at the time of purchase.

4 Press [MENU/SET] to close the menu.

•You can also press the shutter button halfway to close the menu.

[CONTRAST]

Increases the difference between [_] the brightness and the darkness

in the picture.

Decreases the difference

[`] between the brightness and the darkness in the picture.

[SHARPNESS]

[_]	The picture is sharply defined.
[`]	The picture is softly focused.

[SATURATION]

[_]		The colors in the picture become
		vivid.
[`]		The colors in the picture become
		natural.
			[NOISE RED.]
		The noise reduction effect is
[_]	enhanced. Picture resolution may
		deteriorate slightly.
		The noise reduction effect is
[`]	reduced. You can obtain pictures
		with higher resolution.

•Noise may become visible when you take pictures in dark places. To avoid picture noise, we recommend setting

[NOISE RED.] towards [_] or setting the items except [NOISE RED.] towards [`] to take pictures.

•If you adjust a film mode, [_] is displayed beside the film mode name on the LCD monitor.

•You cannot adjust [SATURATION] in the black and white settings in film mode.

•Film mode cannot be adjusted in advanced scene mode and scene mode.

93

VQT1G28