Panasonic DMC-L10K Attaching the Lens Hood, Detaching a lens from the camera body

Preparation

∫Detaching a lens from the camera body

• Check that the camera is turned off.

1 Attach the lens cap.

2 Press the lens release button D while turning the lens as far as possible in the direction of the arrow to detach it.

D

•Always attach the body cap to the camera body so that dirt or dust does not get inside.

•Attach the lens rear cap so that the lens contact point does not get scratched.

•Change lenses where there is not a lot of dirt or dust.

•When you turn the camera off or carry the camera, attach the lens cap to protect the surface of the lens.

•Detach the lens cap before taking pictures.

•Be careful not to lose the lens cap, the lens rear cap and the body cap.

Attaching the Lens Hood

In bright sunlight or backlight, the lens hood will minimize lens flare and ghosting. The lens hood cuts off excess lighting and improves the picture quality.

•Check that the camera is turned off.

•Close the flash.

Insert the lens hood on the lens with the short sides at the top and bottom and then turn it in the direction of the arrow until it clicks.

A

AFit to the mark.

15

VQT1G28