Others

If the MC protector/PL filter are dropped, they may be destroyed. Be careful not to drop them when attaching them to the camera.

You can attach the lens cap or the lens hood when the MC Protector and the PL Filter are attached.

Read the operating instructions of the MC protector or the PL filter for details.

Use the MC protector (DMW-LMCH67; optional) and the PL filter (DMW-LPL67; optional) with the supplied lens.

MCu“Multi-coated”

PLu“Polarizing lens filter”

Using the Remote Shutter

If you use the remote shutter (DMW-RSL1; optional), you can avoid jitter (camera shake) when using a tripod and you can keep the shutter pressed fully when taking pictures with [B] (Bulb) or burst mode. The remote shutter works similar to the shutter button on the camera.

1 Firmly connect the remote shutter to the [REMOTE] socket on the camera as far as it will go.

2 Take a picture.

1Press the button lightly to press halfway.

2Press the button fully to take the picture. (Press it as far as it will go.)

About [LOCK] on the remote shutter

• You can keep the shutter button pressed fully. This is effective when taking pictures with [B] (Bulb) (P43) or in burst mode (P71).

• While pressing the shutter button fully, slide it to the [LOCK] side.

Slide it to the other side to cancel [LOCK].

Do not use any other remote shutters except DMW-RSL1 (optional).

You cannot operate the camera with the remote shutter in the following cases.

– When the power save mode is canceled

127

VQT1G28

Page 127
Image 127
Panasonic DMC-L10K operating instructions Using the Remote Shutter, 127, MCuMulti-coated PLuPolarizing lens filter