Panasonic DMC-L10K 121, Press 4 to select PictBridge PTP and then press MENU/SET

Connecting to other equipment

1 Turn on the camera and the printer.

2 Connect the camera to a printer via the USB connection cable (supplied).

•Connect the USB connection cable with

the [ ] mark facing the [2] mark on the [DIGITAL] socket.

•Hold the USB connection cable at C and insert straight in or take straight out.

3 Press 4 to select

[PictBridge (PTP)] and then press [MENU/SET].

USB MODE
PLEASE SELECT
THE USB MODE
	PC
	PictBridge(PTP)
		MENU
SELECT	SET MENU	/SET

•If you set [USB MODE] in the [SETUP] menu to [PictBridge (PTP)] in advance, it is not necessary to set this every time you connect to a Printer. (P30)

•Do not use any other USB connection cables except the supplied one.

•If you want to print the age in [BABY1]/ [BABY2] or [PET] in scene mode, use the software [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-] in the CD-ROM (supplied) and print from the PC.

∫Single picture

1 Press 3 to select [SINGLE PICTURE] and then press [MENU/SET].

PictBridge

SINGLE PICTURE
DPOF PICTURE
		MENU
SELECT	SET MENU	/SET

2 Press 2/1 to select the picture and then press 4.

PictBridge 100-0001

1/19

PLEASE SELECT

THE PICTURE TO PRINT

SELECT	EXIT MENU
PRINT

•The message disappears in about 2 seconds.

3 Press 3 to select [PRINT START] and then press [MENU/SET].

SINGLE PICTURE
PRINT START
PRINT WITH DATE
NUM. OF PRINTS	1
PAPER SIZE
PAGE LAYOUT		MENU
CANCEL SELECT	SETMENU	/SET

•Press [MENU/SET] to cancel printing.

4 Disconnect the USB connection cable after printing.

121

VQT1G28