Panasonic DMC-L10K operating instructions About the Setup Menu, Clock SET, Auto Review, Power Save

Preparation

About the Setup Menu

•Set items as required.

•Select [RESET] to return the settings to the initial settings at the time of purchase. (P29)

•[CLOCK SET], [AUTO REVIEW] and [POWER SAVE] are important items. Check their settings before using them.

[CLOCK SET]

(Changing the date and time.)

Press [ MENU/SET ] to display the [SETUP] menu and select the item to set. (P26) Change date and time. (P24)

[AUTO REVIEW]

(Displaying the recorded picture.)

Press [ MENU/SET ] to display the [SETUP] menu and select the item to set. (P26)

Set the length of time that the picture is displayed after taking it.

[REVIEW]: This is useful for confirming the composition of the whole screen.

[OFF] [1 SEC.] [2 SEC.] [3 SEC.]

[HOLD] The recorded picture remains displayed.

[ZOOM]: The recorded picture is enlarged 4 times and appears on the screen. This is useful for confirming the focus.

The picture is not enlarged if you use burst mode or auto bracket.

[OFF] [1 SEC.] [2 SEC.] [3 SEC.]

•If [ZOOM] is set to [OFF], the playback screen display can be switched during

28

auto review when taking pictures with the drive mode lever set to [] (P36) or

[ ] (P74).

•When [HOLD] has been selected, the zoom time cannot be set.

•When [HOLD] has been selected, press the shutter button halfway to release the auto review.

•If you use burst mode (P71) or auto bracket (P72), the auto review function is activated regardless of the setting for auto review. (The picture is not enlarged.)

•If [HIGHLIGHT] (P30) is set to [ON], white saturated areas appear blinking in black and white when the auto review function is activated.

[POWER SAVE]

(Turning off this unit automatically.)

Press [ MENU/SET ] to display the [SETUP] menu and select the item to set. (P26)

Power save mode is activated (the camera is automatically turned off to save the battery life) if the camera has not been used for the time selected on the setting.

[OFF], [1MIN.], [2MIN.], [5MIN.], [10MIN.]

•Press the shutter button halfway or turn this unit off and on to cancel power save mode.

•Power save mode is not activated in the following cases.

–When using the AC adaptor (P128)

–When connecting to a PC or a printer

–During a slide show

VQT1G28