Panasonic DMC-L10K Aperture-priority AE, Auto Bracket P72, Focus Priority P106 on

Basic

•[EX. OPT. ZOOM] (P97): [OFF]

•[D.ZOOM] (P98): [OFF]

•[FLASH] (P64): [AUTO]

•[FLASH SYNC.] (P68): [1ST]

•[FLASH ADJUST.] (P68): [0]

•[BURST RATE] (P71): High speed

•[AUTO BRACKET] (P72):

[STEP]: [ 1/3EV ]

[SEQUENCE]: [0/`/_]

•Self-timer (P74):

10 seconds

•[MIRROR UP] (P102): [ON]

•[COLOR SPACE] (P103): [sRGB]

•[LONG SHTR NR] (P103): [ON]

•[AF/AE LOCK] (P104): [AE]

•[AF/AE LOCK HOLD] (P104): [OFF]

•[ISO LIMIT SET] (P80): [OFF]

•[FOCUS PRIORITY] (P106): [ON]

•[AF ASSIST LAMP] (P106): [ON]

•[AF+MF] (P106): [OFF]

•[AF-LED] (P106): [ON]

•[LIVE VIEW AF] (P107): [ ]

•[MENU RESUME] (P107): [ON]

•[SHOOT W/O LENS] (P107): [OFF]

Aperture-priority AE []

Set the aperture value to a higher number when you want a sharp focus background. Set the aperture value to a lower number when you want a soft focus background.

1 Rotate the front dial left and right to set the aperture value.

2 Take a picture.

•You can change the operation method of the dials with [DIAL SET.] (P105) in the [CUSTOM MENU] menu.

•If [LCD AUTO] in the [SETUP] menu is set to [OFF] and you press the shutter button halfway when the exposure is not adequate, the aperture value and the shutter speed on the LCD monitor (information display screen) turn red. The aperture value and the shutter speed blink on the Viewfinder. (They do not blink when the flash is activated.)

•When most of the subject is bright, such as during fine weather or snow, the recorded pictures may become dark. In these cases, compensate the exposure towards positive. (P44)

•When you use a lens with an aperture ring, the setting for the front dial becomes effective if you rotate the aperture ring to the [A] position and the aperture ring setting takes priority if you rotate the aperture ring to a position other than [A].

41

VQT1G28