Panasonic DMC-L10K Taking Pictures using Auto Bracket, Focusing in burst mode

1/3EV ] is set)

Advanced

∫Focusing in burst mode

The focus changes depending on the setting for [FOCUS PRIORITY] in the [CUSTOM MENU] menu (P106) and the focus mode setting.

Focus mode	Focus	Focus
	Priority
AFS	ON	At the first picture
	OFF
AFC¢1	ON	Normal focusing¢2
	OFF	Predicted
		focusing¢3
MF	–	Focus set with
		manual focus

¢1 When you take pictures using Live View, the focus mode setting is [AFS] and the focus is fixed at the first picture.

¢2 The burst speed may become slower because the camera is continuously focusing on the subject.

¢3 The burst speed does not become as slow as when [FOCUS PRIORITY] is set to [ON].

•We recommend using the remote shutter (DMW-RSL1; optional) when you want to keep the shutter button pressed fully while taking pictures in burst mode. Refer to P127 for information about the remote shutter.

•The exposure and the white balance vary

depending on the burst mode setting.

When burst mode is set to [ ], they are fixed to the values set for the first picture.

When the burst speed is set to [ ], they are adjusted each time you take a picture.

•The auto review function is activated regardless of the setting for auto review. (The picture is not enlarged.)

•When the flash is activated, you can take only 1 picture.

•The burst speed is fixed to high speed

[ ] in auto mode [ ].

72

Taking Pictures using Auto Bracket

In this mode, 3 pictures are recorded in the selected exposure compensation range each time the shutter button is pressed. You can select the picture with the desired exposure among different exposures.

1 Set the drive mode lever to [ ].

A

B C

ISO P F5.6 125 ISO100

STANDARD

119

A Auto Bracket (When [

BViewfinder Display

CWhen taking pictures with Live View

•[ ] is displayed on the Viewfinder. (It is displayed on the LCD monitor when

taking pictures with Live View.)

2 Focus on the subject and take a picture.

•If you press and hold the shutter button, the number of pictures that you set is taken.

•The auto bracket indication blinks until the number of pictures that you set (3) is taken.

•The picture count is reset to [0] if you change the auto bracket setting, change the setting on the drive mode lever or turn the camera off before all the pictures that you set are taken.

VQT1G28